====== MPINO-16A8R 7-Segment LED Wiring ======

Connect up to **2** displays using the analog input terminals. This wiring applies to the factory 0~5 V analog input mode.

{{ :en-us_guide:seven_segment:wiring:mpino_16a8r.png?1200 | MPINO-16A8R wiring for the maximum number of FND displays }}

^ Device number ^ LED CLK ^ LED DIO ^ Built-in function pin setting ^
| 0 | A(2) (Arduino A2) | A(3) (Arduino A3) | ''IsegBegin(A2, A3, 100, 0);'' |
| 1 | A(0) (Arduino A0) | A(1) (Arduino A1) | ''IsegBegin(A0, A1, 100, 1);'' |

Terminals used for an LED cannot be used as analog inputs at the same time. **The +5V output of this product is limited to 100 mA.** Check the current rating of your LEDs before connecting them.

[[:en-us_guide:seven_segment|7-Segment LED Guide]] · [[:en-us_commands:reference:isegbegin|IsegBegin() function reference]]