====== MPINO-8A4R(T)-S 7-Segment LED Wiring ======

Connect up to **2** displays using the FND/ENCO and PWM ports.

{{ :en-us_guide:seven_segment:wiring:mpino_8a4r_s.png?1200 | MPINO-8A4R(T)-S wiring for the maximum number of FND displays }}

^ Device number ^ LED CLK ^ LED DIO ^ Built-in function pin setting ^
| 0 | FND/ENCO CLK (D24) | FND/ENCO DIO (D25) | ''IsegBegin(24, 25, 100, 0);'' |
| 1 | PWM D21 | PWM D22 | ''IsegBegin(21, 22, 100, 1);'' |

On MPINO-8A4R-S, the PWM connector is printed 21, 22, 23. On MPINO-8A4T-S, the same connector is printed 0, 1, 2, so D21 and D22 are the terminals printed 0 and 1.

[[:en-us_guide:seven_segment|7-Segment LED Guide]] · [[:en-us_commands:reference:isegbegin|IsegBegin() function reference]]