====== MPINO-8A8R(T)-S 7-Segment LED Wiring ======

Connect up to **4** displays using the ENC/FND and PWM ports.

**MPINO-8A8T-S:** The standard board cannot drive a 7-segment display on the ENC/FND connector because of the 4.7 kΩ pull-downs on D24 and D25. With the 7-segment control option, we change them to 10 kΩ pull-ups. The PWM terminals (devices 1~3) are not affected, so the standard board can connect up to 3 displays.

{{ :en-us_guide:seven_segment:wiring:mpino_8a8r_s.png?1200 | MPINO-8A8R(T)-S wiring for the maximum number of FND displays }}

^ Device number ^ LED CLK ^ LED DIO ^ Built-in function pin setting ^
| 0 | ENC/FND CLK (D24) | ENC/FND DIO (D25) | ''IsegBegin(24, 25, 100, 0);'' |
| 1 | PWM D21 | PWM D22 | ''IsegBegin(21, 22, 100, 1);'' |
| 2 | PWM D23 | PWM D26 | ''IsegBegin(23, 26, 100, 2);'' |
| 3 | PWM D27 | PWM D28 | ''IsegBegin(27, 28, 100, 3);'' |

[[:en-us_guide:seven_segment|7-Segment LED Guide]] · [[:en-us_commands:reference:isegbegin|IsegBegin() function reference]]