====== MCS Box Function ======

**Master Control Set**

Category: [[en-us_products:mpino_studio2:box_functions:logic_control|Logic Control Box Functions]]

===== Behavior =====

Starts a master control zone at a level from 0 to 15. When the left condition is OFF, coils in the zone up to the matching MCSCLR are processed as OFF.

===== Syntax and Arguments =====

**Syntax:** ''MCS 0''

  * 1st = level: 0 to 15; use lower numbers for outer zones

===== Behavior Example =====

^ Run condition ^ Before ^ Command entered ^ Expected result ^
| Left condition OFF | MCS 0 zone | ''MCS 0'' | Zone coils are OFF; calculation and transfer targets hold |

{{ :en-us_products:mpino_studio2:logic-control-examples.svg?1000 |Inputs and results for Logic Control Box Functions }}

===== Cautions =====

  * Use a level from 0 to 15, assigning lower numbers to outer zones. Match the level of the corresponding MCSCLR.

===== Box Functions in the Same Category =====

  * [[en-us_products:mpino_studio2:box_functions:logic_control:jmp|JMP View details]] — Jump
  * [[en-us_products:mpino_studio2:box_functions:logic_control:jmpn|JMPN View details]] — Jump if Not
  * [[en-us_products:mpino_studio2:box_functions:logic_control:mcsclr|MCSCLR View details]] — Master Control Clear