====== MPINO STUDIO 2 Quick Reference ======

Choose a task to open its detailed instructions. These are the default shortcuts; you can change them under **File → Preferences → Shortcuts**.

===== Find Instructions by Task =====

^ Task ^ Detailed instructions ^
| Install the app and upload a first circuit | [[en-us_products:mpino_studio2:first_project|Phase 1 · Create Your First Project]] |
| Understand memory addresses and board pin mapping | [[en-us_products:mpino_studio2:memory|Phase 2 · Understand Memory]] |
| Edit contacts, coils, lines, and cells | [[en-us_products:mpino_studio2:ladder_editing|Phase 3 · Ladder Editing Basics]] |
| Use timer, counter, and arithmetic box functions | [[en-us_products:mpino_studio2:box_functions#box_function_list|Phase 4 · Box Function List]] |
| Edit Arduino Code and functions | [[en-us_products:mpino_studio2:code_editor|Phase 5 · Editing Arduino Code]] |
| Check serial values and ladder operation | [[en-us_products:mpino_studio2:monitoring|Phase 6 · Serial and Ladder Monitoring]] |
| Set up projects, boards, communication, and pin maps | [[en-us_products:mpino_studio2:menus_settings|Phase 7 · Menus and Preferences]] |
| Use Explorer, libraries, and symbols | [[en-us_products:mpino_studio2:activity_bar|Phase 8 · Activity Bar and Side Panels]] |
| Resolve build, upload, and monitoring problems | [[en-us_products:mpino_studio2:troubleshooting|Phase 9 · Troubleshooting]] |

===== Default Shortcuts =====

^ Task · select for details ^ Default shortcut ^
| [[en-us_products:mpino_studio2:menus_settings#openㆍsaveㆍprint_projects|New / Open / Save]] | ''Ctrl + N'' / ''Ctrl + O'' / ''Ctrl + S'' |
| [[en-us_products:mpino_studio2:menus_settings#run_menu|Build / Upload]] | ''Ctrl + R'' / ''Ctrl + U'' |
| [[en-us_products:mpino_studio2:ladder_editing#define_and_create_no_nc_and_not_contacts|NO / NC contact]] | ''F2'' / ''F3'' |
| [[en-us_products:mpino_studio2:ladder_editing#connect_horizontal_and_vertical_lines|Horizontal / Vertical line]] | ''F5'' / ''F6'' |
| [[en-us_products:mpino_studio2:ladder_editing#create_an_output_coil|SET / RESET / Output coil]] | ''F7'' / ''F8'' / ''F9'' |
| [[en-us_products:mpino_studio2:box_functions#create_a_box_function|Enter box function]] | ''Ctrl + Enter'' |
| [[en-us_products:mpino_studio2:ladder_editing#write_a_value_to_memory|Write selected cell's memory value]] | ''Ctrl + Shift + W'' |
| [[en-us_products:mpino_studio2:monitoring#start_and_stop_ladder_monitoring|Toggle ladder monitoring]] | ''Ctrl + M'' |
| [[en-us_products:mpino_studio2:menus_settings#settings_menu|Memory areas / Ladder pin map]] | ''Ctrl + Shift + M'' / ''Ctrl + Shift + P'' |
| [[en-us_products:mpino_studio2:code_editor|Code completion / Go to definition]] | ''Ctrl + Space'' / ''F12'' |

''F2'' and ''F12'' depend on whether the ladder grid or code editor has focus. Select the intended editing area first.

===== Related Documents =====

  * [[en-us_products:mpino_studio2|MPINO STUDIO 2 User Manual]]