MPINO-16A8R 7-Segment LED Wiring
Connect up to 2 displays using the analog input terminals. This wiring applies to the factory 0~5 V analog input mode.
| Device number | LED CLK | LED DIO | Built-in function pin setting |
|---|---|---|---|
| 0 | A(2) (Arduino A2) | A(3) (Arduino A3) | IsegBegin(A2, A3, 100, 0); |
| 1 | A(0) (Arduino A0) | A(1) (Arduino A1) | IsegBegin(A0, A1, 100, 1); |
Terminals used for an LED cannot be used as analog inputs at the same time. The +5V output of this product is limited to 100 mA. Check the current rating of your LEDs before connecting them.