ILOGICS Product Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Debug and Watchdog ======

Inspect execution state or configure the Watchdog.

===== Debug =====

  * [[:en-us_commands:reference:debugstart|debugStart()]] — Sets the port and baud rate for debug output.
  * [[:en-us_commands:reference:debugstop|debugStop()]] — Stops debug output.
  * [[:en-us_commands:reference:debugstate|debugState()]] — Returns whether debug output is enabled.
  * [[:en-us_commands:reference:debug|debug()]] — Outputs values only when debugging is enabled.
  * [[:en-us_commands:reference:debugln|debugln()]] — Outputs a debug value followed by a newline.

===== Watchdog =====

  * [[:en-us_commands:reference:wdt_enable|WDT_ENABLE()]] — Sets the Watchdog timeout and starts it.
  * [[:en-us_commands:reference:wdt_disable|WDT_DISABLE()]] — Stops the Watchdog.
  * [[:en-us_commands:reference:wdt|WDT()]] — Refreshes the Watchdog before its timeout expires.

[[:en-us_commands:builtin|← Built-in function list]]