Differences

This shows you the differences between two versions of the page.

--- en-us_commands:reference:icnetinit [2026/09/07 23:35] – 바깥 편집 127.0.0.1
+++ en-us_commands:reference:icnetinit [2026/09/14 20:30] (current) – external edit 127.0.0.1
@@ Line 14: / Line 14: @@
 ===== Example =====
+This example uses the MPINO-16A8R8T RS-485 port ''Serial2'', input ''D22'', and transistor output ''D39''.
 <code cpp>
@@ Line 25: / Line 27: @@
 void loop() {
   ICnet();  // Check incoming requests and process Cnet Slave responses.
-  if (M != nullptr) M[0] = IdigitalRead(0, 5);  // Read the input repeatedly and update only if all samples match. If HIGH and LOW are mixed, retain the previous stable state.
+  if (M != nullptr) M[0] = digitalRead(22) == HIGH;
-  if (D != nullptr) digitalWrite(32, D[0] ? HIGH : LOW);
+  if (D != nullptr) digitalWrite(39, D[0] ? HIGH : LOW);
 }
 </code>
@@ Line 36: / Line 38: @@
   * When sharing memory with Modbus, check for duplicate allocation and address conventions. Both ''ICnetMem()'' and ''ImodbusRTUMem()'' reallocate shared ''M''/''D''. Assign final size management to only one of them and initialize both protocols after the last reallocation.
   * Allocation functions do not return success status. Check whether ''M'', ''D'' and ''R'' are ''nullptr'' before accessing them in user code.
+===== Built-in Commands in the Same Category =====
+  * [[:en-us_commands:reference:icnetmem|ICnetMem() View detailed description]]
+  * [[:en-us_commands:reference:icnetadr|ICnetAdr() View detailed description]]
+  * [[:en-us_commands:reference:icnet|ICnet() View detailed description]]
 [[:en-us_commands:builtin|← Built-in Command List]]