Differences

This shows you the differences between two versions of the page.

--- en-us_commands:reference:irtcclearoscillatorstopflag [2026/09/07 21:52] – 만듦 - 바깥 편집 127.0.0.1
+++ en-us_commands:reference:irtcclearoscillatorstopflag [2026/09/08 00:53] (current) – 바깥 편집 127.0.0.1
@@ Line 16: / Line 16: @@
 <code cpp>
-struct IrtcDateTime {
+void setup() {
-  uint16_t year;
+  Serial.begin(115200);
-  uint8_t month;
+  if (!IrtcBegin()) return;  // Check the DS3231 RTC connection and begin operation.
-  uint8_t day;
-  uint8_t dayOfWeek;
-  uint8_t hour;
-  uint8_t minute;
-  uint8_t second;
-};
-bool IrtcBegin();
+  bool valid = false;
-bool IrtcRead(IrtcDateTime& dateTime);
+  if (IrtcTimeValid(valid) && !valid) {  // Check whether the RTC time is reliable.
-bool IrtcSet(uint16_t year, uint8_t month, uint8_t day, uint8_t hour,
+    IrtcSet(2026, 9, 7, 9, 0, 0);  // Set the RTC date and time.
-             uint8_t minute, uint8_t second);
+    IrtcClearOscillatorStopFlag();  // Clear the oscillator-stop flag.
-bool IrtcSet(uint16_t year, uint8_t month, uint8_t day, uint8_t dayOfWeek,
+  }
-             uint8_t hour, uint8_t minute, uint8_t second);
+}
-bool IrtcUnixTime(uint32_t& unixTime);
-bool IrtcGetTemperature(float& temperature);
+void loop() {
-bool IrtcTimeValid(bool& valid);
+  IrtcDateTime now;
-bool IrtcClearOscillatorStopFlag();
+  uint32_t unixTime = 0;
+  float rtcTemperature = 0.0F;
+  if (IrtcRead(now) && IrtcUnixTime(unixTime) && IrtcGetTemperature(rtcTemperature)) {  // Return the RTC's internal temperature. / Return the current time as Unix time. / Read the RTC date and time.
+    Serial.print(unixTime); Serial.print(','); Serial.println(rtcTemperature, 2);
+  }
+  delay(1000);
+}
 </code>
@@ Line 41: / Line 41: @@
 Run each device's corresponding ''Begin'' command first. Check I²C addresses and pin sharing; if the ''bool'' return value is ''false'', inspect wiring and power.
+===== Built-in Commands in the Same Category =====
+  * [[:en-us_commands:reference:irtcbegin|IrtcBegin() View detailed description]]
+  * [[:en-us_commands:reference:irtcread|IrtcRead() View detailed description]]
+  * [[:en-us_commands:reference:irtcset|IrtcSet() View detailed description]]
+  * [[:en-us_commands:reference:irtcunixtime|IrtcUnixTime() View detailed description]]
+  * [[:en-us_commands:reference:irtcgettemperature|IrtcGetTemperature() View detailed description]]
+  * [[:en-us_commands:reference:irtctimevalid|IrtcTimeValid() View detailed description]]
+  * [[:en-us_commands:reference:irtcsetalarm1|IrtcSetAlarm1() View detailed description]]
+  * [[:en-us_commands:reference:irtcsetalarm2|IrtcSetAlarm2() View detailed description]]
+  * [[:en-us_commands:reference:irtcalarmenable|IrtcAlarmEnable() View detailed description]]
+  * [[:en-us_commands:reference:irtcalarmenabled|IrtcAlarmEnabled() View detailed description]]
+  * [[:en-us_commands:reference:irtcalarmtriggered|IrtcAlarmTriggered() View detailed description]]
+  * [[:en-us_commands:reference:irtcsquarewave|IrtcSquareWave() View detailed description]]
+  * [[:en-us_commands:reference:irtc32khz|Irtc32kHz() View detailed description]]
 [[:en-us_commands:builtin|← Built-in Command List]]