Differences

This shows you the differences between two versions of the page.

--- en-us_guide:getting_started [2026/09/15 13:15] – external edit 127.0.0.1
+++ en-us_guide:getting_started [2026/09/15 15:28] (current) – external edit 127.0.0.1
@@ Line 29: / Line 29: @@
 ==== MPINO-16A8R ====
-  - Connect the PC to the product's **USB download port** with a USB cable.
+  - Connect the PC to the product's **USB download port** with a **USB A-to-B cable**.
   - In Device Manager, note the COM number shown for ''Silicon Labs CP210x USB to UART Bridge(COMx)''.
   - If the port does not appear, install the [[https://www.ilogics.net/en-us/resources/downloads/driver/2|CP210x USB driver]] and reconnect the cable.
@@ Line 35: / Line 35: @@
 ==== Other MPINO Models ====
-  - Connect the PC to the product's download port with an ILOGICS **MP Download Cable**.
+  - Connect the PC to the product's download port with an **MP Download Cable**.
   - In Device Manager, note the COM number shown for ''USB Serial Port(COMx)''.
   - If the port does not appear, install the [[https://www.ilogics.net/en-us/resources/downloads/driver/1|FTDI driver for the MP Download Cable]] and reconnect it.
@@ Line 41: / Line 41: @@
 ===== 3. Select the Board and Port =====
-Find the board name in the **Arduino IDE settings** table on the [[:en-us_products:mpino_series#arduino_ide_settings|MPINO]] or [[:en-us_products:mpaino#arduino_ide_settings|MPAINO]] product-family page. Open **Select other board and port…** from the board selector at the top of Arduino IDE, then search for the same name. The product name in the figure is an example of the selection method.
+Find the board name in the [[:en-us_products:mpino_series#mpino_series_specifications|MPINO Series specifications]] or the [[:en-us_products:mpaino#mpaino_series_specifications|MPAINO Series specifications]]. Open **Select other board and port…** from the board selector at the top of Arduino IDE, then search for the same name. The product name in the figure is an example of the selection method.
 {{ :guide:arduino-ide-board-selection.svg?480 |Example of searching for and selecting an ILOGICS board in Arduino IDE }}
@@ Line 48: / Line 48: @@
 ^ No. ^ Selection ^
-| **1** | In the **BOARDS** search field, enter the board name shown in the product family's Arduino IDE settings table. |
+| **1** | In the **BOARDS** search field, enter the board name shown in the product-family table. |
 | **2** | Select the result with the exact same name. R and T products grouped together use the common board name containing ''R(T)''. |
@@ Line 69: / Line 69: @@
 ===== 4. Blink the First Output =====
-Find the first I/O numbers for your model in the product family's **Arduino IDE settings** table, then use the example below with the same numbers. Open **File → New Sketch**, enter the code, and save it with **Ctrl + S**. Select **Verify (✓)** and wait for ''Done compiling.'', then select **Upload (→)**.
+Find the first I/O numbers for your model in the product-family table, then use the example below with the same numbers. Open **File → New Sketch**, enter the code, and save it with **Ctrl + S**. Select **Verify (✓)** and wait for ''Done compiling.'', then select **Upload (→)**.
 A relay output can be checked by its operating sound. To check a transistor output, switch off power and connect a test load according to the output-wiring section on the product page.
@@ Line 208: / Line 208: @@
 ^ Symptom ^ What to check ^
-| The model is missing from the board results | Confirm that ''ARDUINO SDK INSTALL'' ran, then restart Arduino IDE. Search for the board name exactly as shown in the product family's Arduino IDE settings table. |
+| The model is missing from the board results | Confirm that ''ARDUINO SDK INSTALL'' ran, then restart Arduino IDE. Search for the board name exactly as shown in the product-family table. |
 | No COM port appears in Device Manager | Use section 3 to check the connection and driver for your product. MPINO-16A8R does not use the MP Download Cable. |
 | Verify reports an error | Check that the selected board matches the product and the code was entered correctly. Start with the first error shown in the output panel. |
 | Upload fails | Confirm that Device Manager and Arduino IDE show the same COM number. Check the cable connection and product power. |
-| Upload succeeds but the output does not change | Recheck the first output number and R/T output type in the product family's Arduino IDE settings table. A transistor output needs a wired test load to show its state. |
+| Upload succeeds but the output does not change | Recheck the first output number in the product-family table and the R/T output type on the product page. A transistor output needs a wired test load to show its state. |
-| The output does not follow the input | Recheck the first input number in the product family's Arduino IDE settings table and the input-to-COM wiring on the product page. |
+| The output does not follow the input | Recheck the first input number in the product-family table and the input-to-COM wiring on the product page. |
 ===== Next Documents =====