en-us_products:mp_studio:ladder_editing

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
en-us_products:mp_studio:ladder_editing [2026/11/05 10:13] – external edit 127.0.0.1en-us_products:mp_studio:ladder_editing [2026/11/12 20:37] (current) – external edit 127.0.0.1
Line 53: Line 53:
 ===== Self-Holding Circuit ===== ===== Self-Holding Circuit =====
  
-To keep the output ON even after the start input was ON only briefly, put a contact of the output itself in parallel.+To keep the output ON even if the start input is ON only briefly, put a contact of the output itself in parallel.
  
 {{ :en-us_products:mp_studio:ladder-self-hold-marked.svg?1100 |Figure 4. A self-holding circuit with start P0, stop P1 and output P32 }} {{ :en-us_products:mp_studio:ladder-self-hold-marked.svg?1100 |Figure 4. A self-holding circuit with start P0, stop P1 and output P32 }}
Line 72: Line 72:
 A rising edge (''F11'') passes power for one scan at the moment the preceding condition goes from OFF to ON, and a falling edge (''F12'') at the moment it goes from ON to OFF. Use them for actions that must run only once, such as a circuit that increases a value by one each time a button is pressed. Put the edge directly after the contact whose change you want to catch (for example ''P2''). A rising edge (''F11'') passes power for one scan at the moment the preceding condition goes from OFF to ON, and a falling edge (''F12'') at the moment it goes from ON to OFF. Use them for actions that must run only once, such as a circuit that increases a value by one each time a button is pressed. Put the edge directly after the contact whose change you want to catch (for example ''P2'').
  
-The name of an edge cell is the bit that remembers the previous state. If you leave the name empty, an automatic name (''#Edge…'') is used. If you use an address that the device overwrites on every scan, such as an input (''P'') address, as the name, the cell turns red, so unless you have a specific reason, leave the name empty.+The name of an edge cell is the bit that remembers the previous state. If you leave the name empty, an automatic name (''#Edge…'') is used. If you use an address that the PLC overwrites on every scan, such as an input (''P'') address, as the name, the cell turns red, so unless you have a specific reason, leave the name empty.
  
 {{ :en-us_products:mp_studio:ladder-edge-timing.svg?1000 |Figure 6. When rising and falling edges pass power }} {{ :en-us_products:mp_studio:ladder-edge-timing.svg?1000 |Figure 6. When rising and falling edges pass power }}
Line 82: Line 82:
 {{ :en-us_products:mp_studio:wire-memo-bookmark.png?1100 |Figure 7. The bookmark [Motor run] on row 0 and a note on row 2 }} {{ :en-us_products:mp_studio:wire-memo-bookmark.png?1100 |Figure 7. The bookmark [Motor run] on row 0 and a note on row 2 }}
  
-Bookmarks are listed in the **Mark** list at the bottom of the Functions panel; click a line in the list to go to that row. You can show or hide the list with **View → Bookmark List**.+Bookmarks are listed in the **Bookmark List** at the bottom of the Functions panel; click a line in the list to go to that row. You can show or hide the list with **View → Bookmark List**.
  
 ===== Editing Cells and Lines ===== ===== Editing Cells and Lines =====
Line 144: Line 144:
 {{ :en-us_products:mp_studio:find-panel-marked.svg?1200 |Figure 14. The Text Search window with all matching cells highlighted }} {{ :en-us_products:mp_studio:find-panel-marked.svg?1200 |Figure 14. The Text Search window with all matching cells highlighted }}
  
-  - In **① Address to find**, enter the text to look for, such as ''P0'' or ''M10''.+  - In **① Find address**, enter the text to look for, such as ''P0'' or ''M10''.
   - Use **③ ↓ Next** and **↑ Previous** to move between matches. The position and number of matches (for example **1 / 3 matches**) are shown, and **④ the matching cells** are all highlighted on the canvas.   - Use **③ ↓ Next** and **↑ Previous** to move between matches. The position and number of matches (for example **1 / 3 matches**) are shown, and **④ the matching cells** are all highlighted on the canvas.
-  - To replace, enter **② Replace with** and click **Replace** or **Replace All**. If you leave Replace with empty, the matched text is deleted.+  - To replace, enter **② Replace with** and click **Replace** or **Replace all**. If you leave Replace with empty, the matched text is deleted.
  
 ^ Option ^ Action ^ ^ Option ^ Action ^
 | Match case | Distinguishes uppercase and lowercase letters. | | Match case | Distinguishes uppercase and lowercase letters. |
-| Also search symbols & comments | Searches symbol names and comments as well as addresses. |+| Also search symbols and comments | Searches symbol names and comments as well as addresses. |
 | Match whole word | Finds only cells whose whole address matches what you typed. | | Match whole word | Finds only cells whose whole address matches what you typed. |
 | Function block name | Searches by function block name (for example ''TON''). | | Function block name | Searches by function block name (for example ''TON''). |
 | In selection only | When two or more cells are selected in the ladder, finds and replaces only within those rows. | | In selection only | When two or more cells are selected in the ladder, finds and replaces only within those rows. |
  
-If **Replace All** for ''M1'' would also change other addresses that only partly match, such as ''M10'', a confirmation is shown. **Replace Whole Addresses Only** replaces only cells whose whole address matches, and **Replace All Anyway** also replaces the partly matching addresses. **Cancel** replaces nothing. Function blocks can be found by the beginning of their name, but cannot be replaced.+If **Replace all** for ''M1'' would also change other addresses that only partly match, such as ''M10'', a confirmation is shown. **Replace whole addresses only** replaces only cells whose whole address matches, and **Replace all anyway** also replaces the partly matching addresses. **Cancel** replaces nothing. Function blocks can be found by the beginning of their name, but cannot be replaced.
  
-{{ :en-us_products:mp_studio:replace-confirm.png?390 |Figure 15. The Replace All confirmation when other addresses would also change }}+{{ :en-us_products:mp_studio:replace-confirm.png?390 |Figure 15. The Replace all confirmation when other addresses would also change }}
  
 ===== Navigation ===== ===== Navigation =====
en-us_products/mp_studio/ladder_editing.1793841188.txt.gz · Last modified: by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki