en-us_products:mp_studio:memory_symbols

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
en-us_products:mp_studio:memory_symbols [2026/10/30 11:27] – created - external edit 127.0.0.1en-us_products:mp_studio:memory_symbols [2026/11/12 20:37] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ====== MP STUDIO 2 Phase 5 · Memory and Symbols ====== ====== MP STUDIO 2 Phase 5 · Memory and Symbols ======
- 
-[[products:mp_studio:memory_symbols|한국어]] | **English** 
  
 An address used in the ladder consists of a memory area name and a number. This page describes the memory areas and their notation, data memory sizes and retentive settings, the symbol table, and how to check which data is used. An address used in the ladder consists of a memory area name and a number. This page describes the memory areas and their notation, data memory sizes and retentive settings, the symbol table, and how to check which data is used.
Line 10: Line 8:
  
 ^ Area ^ Name ^ Use ^ Basic unit ^ ^ Area ^ Name ^ Use ^ Basic unit ^
-| ''P'' | I/O | Digital input and output points of the device | Bit |+| ''P'' | I/O | Digital input and output points of the PLC | Bit |
 | ''M'' | Internal relay | Bits used inside the program | Bit | | ''M'' | Internal relay | Bits used inside the program | Bit |
 | ''D'' | Data | Numeric values | Word | | ''D'' | Data | Numeric values | Word |
Line 34: Line 32:
  
 Eight bit addresses make one byte. For example, ''P0'' to ''P7'' are ''BP0'', and ''P32'' to ''P39'' are ''BP4''. Double word numbers overlap in word steps: ''DD0'' occupies ''D0'' and ''D1'', and ''DD1'' occupies ''D1'' and ''D2''. Be careful not to use overlapping double words together. Eight bit addresses make one byte. For example, ''P0'' to ''P7'' are ''BP0'', and ''P32'' to ''P39'' are ''BP4''. Double word numbers overlap in word steps: ''DD0'' occupies ''D0'' and ''D1'', and ''DD1'' occupies ''D1'' and ''D2''. Be careful not to use overlapping double words together.
 +
 +Addresses such as ''D100[D0]'', which point to the cell that is an index value away, are described in [[:en-us_products:mp_studio:indexed_address|Indexed Addresses (Pointers)]] (V1.3.0 and later).
  
 ===== System Bits and User Variables ===== ===== System Bits and User Variables =====
Line 41: Line 41:
 | ''@Fn'' | A blink that toggles ON/OFF every ''n''×10 ms. Example: ''@F100'' has a 2-second period. | | ''@Fn'' | A blink that toggles ON/OFF every ''n''×10 ms. Example: ''@F100'' has a 2-second period. |
 | ''#name'' · ''##name'' · ''###name'' | User bit, word and double word variables used by name | | ''#name'' · ''##name'' · ''###name'' | User bit, word and double word variables used by name |
 +
 +In a project whose [[:en-us_products:mp_studio:menus_settings#timer_base|timer base]] is set to 1 ms, ''@n'' and ''@Fn'' work every ''n''×1 ms (V1.3.0 and later). Example: ''@1000'' is ON for one scan every second.
  
 ===== Data Memory ===== ===== Data Memory =====
  
-Select **Setting → Data Memory** to open the **Data Memory** window, where you set the size of each area and the retentive ranges.+Select **Settings → Data Memory** to open the **Data Memory** window, where you set the size of each area and the retentive ranges.
  
 {{ :en-us_products:mp_studio:data-memory-dialog-marked.svg?720 |Figure 3. The Data Memory window }} {{ :en-us_products:mp_studio:data-memory-dialog-marked.svg?720 |Figure 3. The Data Memory window }}
Line 63: Line 65:
 {{ :en-us_products:mp_studio:device-select-mpa-marked.svg?700 |Figure 4. Selecting the model and expansion modules of an MPA model }} {{ :en-us_products:mp_studio:device-select-mpa-marked.svg?700 |Figure 4. Selecting the model and expansion modules of an MPA model }}
  
-For MPA models, select **① MPA**, then choose **② Model** and **③ the expansion modules** (**Analog Input** X to X5, **Analog Output** Y to Y4, **PT100Ω Input** F to F5, **Pulse Output** K to K4). **④ Device Name** shows the name including the module configuration (for example ''MPA-16A16R(T)-X''), along with the CPU and the P area size. If you choose a combination that cannot be fitted, the reason is shown at the bottom of the window.+For MPA models, select **① MPA**, then choose **② Model** and **③ the expansion modules** (**Analog input** X to X5, **Analog output** Y to Y4, **PT100Ω input** F to F5, **Pulse output** K to K4). **④ Device name** shows the name including the module configuration (for example ''MPA-16A16R(T)-X''), along with the CPU and the P area size. If you choose a combination that cannot be fitted, the reason is shown at the bottom of the window.
  
 ===== Symbol Table ===== ===== Symbol Table =====
  
-Symbols are names and descriptions attached to addresses. Select **Setting → Symbol** or click the **Symbol** button in the top band to open the **SYMBOL TABLE** window.+Symbols are names and descriptions attached to addresses. Select **Settings → Symbol** or click the **Symbol Table** button in the top band to open the **Symbol Table** window.
  
-{{ :en-us_products:mp_studio:symbol-table-marked.svg?860 |Figure 5. The SYMBOL TABLE window }}+{{ :en-us_products:mp_studio:symbol-table-marked.svg?860 |Figure 5. The Symbol Table window }}
  
   - Choose an area in **① the memory area tabs** (P Memory, M Memory, D Memory and so on) to show only the symbols of that area. The number next to a tab is the number of registered symbols.   - Choose an area in **① the memory area tabs** (P Memory, M Memory, D Memory and so on) to show only the symbols of that area. The number next to a tab is the number of registered symbols.
Line 88: Line 90:
 ===== Used Data ===== ===== Used Data =====
  
-Select **Run → Used Data** or click the **Used** button in the top band to open the **Used Memory** window. In the memory grid of each area you can see which locations the program uses.+Select **Run → Used Data** or click the **Used Data** button in the top band to open the **Used Data** window. In the memory grid of each area you can see which locations the program uses.
  
-{{ :en-us_products:mp_studio:use-data-viewer-marked.svg?425 |Figure 7. The memory grid of the Used Memory window (D Memory) }}+{{ :en-us_products:mp_studio:use-data-viewer-marked.svg?425 |Figure 7. The memory grid of the Used Data window (D Memory) }}
  
   * **① Area tabs:** choose the area to view: M Memory, T Memory, D Memory, C Memory or R Memory.   * **① Area tabs:** choose the area to view: M Memory, T Memory, D Memory, C Memory or R Memory.
en-us_products/mp_studio/memory_symbols.1793327274.txt.gz · Last modified: by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki