en-us_products:mp_studio:memory_symbols

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
en-us_products:mp_studio:memory_symbols [2026/11/11 02:36] – external edit 127.0.0.1en-us_products:mp_studio:memory_symbols [2026/11/12 20:37] (current) – external edit 127.0.0.1
Line 8: Line 8:
  
 ^ Area ^ Name ^ Use ^ Basic unit ^ ^ Area ^ Name ^ Use ^ Basic unit ^
-| ''P'' | I/O | Digital input and output points of the device | Bit |+| ''P'' | I/O | Digital input and output points of the PLC | Bit |
 | ''M'' | Internal relay | Bits used inside the program | Bit | | ''M'' | Internal relay | Bits used inside the program | Bit |
 | ''D'' | Data | Numeric values | Word | | ''D'' | Data | Numeric values | Word |
Line 46: Line 46:
 ===== Data Memory ===== ===== Data Memory =====
  
-Select **Setting → Data Memory** to open the **Data Memory** window, where you set the size of each area and the retentive ranges.+Select **Settings → Data Memory** to open the **Data Memory** window, where you set the size of each area and the retentive ranges.
  
 {{ :en-us_products:mp_studio:data-memory-dialog-marked.svg?720 |Figure 3. The Data Memory window }} {{ :en-us_products:mp_studio:data-memory-dialog-marked.svg?720 |Figure 3. The Data Memory window }}
Line 65: Line 65:
 {{ :en-us_products:mp_studio:device-select-mpa-marked.svg?700 |Figure 4. Selecting the model and expansion modules of an MPA model }} {{ :en-us_products:mp_studio:device-select-mpa-marked.svg?700 |Figure 4. Selecting the model and expansion modules of an MPA model }}
  
-For MPA models, select **① MPA**, then choose **② Model** and **③ the expansion modules** (**Analog Input** X to X5, **Analog Output** Y to Y4, **PT100Ω Input** F to F5, **Pulse Output** K to K4). **④ Device Name** shows the name including the module configuration (for example ''MPA-16A16R(T)-X''), along with the CPU and the P area size. If you choose a combination that cannot be fitted, the reason is shown at the bottom of the window.+For MPA models, select **① MPA**, then choose **② Model** and **③ the expansion modules** (**Analog input** X to X5, **Analog output** Y to Y4, **PT100Ω input** F to F5, **Pulse output** K to K4). **④ Device name** shows the name including the module configuration (for example ''MPA-16A16R(T)-X''), along with the CPU and the P area size. If you choose a combination that cannot be fitted, the reason is shown at the bottom of the window.
  
 ===== Symbol Table ===== ===== Symbol Table =====
  
-Symbols are names and descriptions attached to addresses. Select **Setting → Symbol** or click the **Symbol** button in the top band to open the **SYMBOL TABLE** window.+Symbols are names and descriptions attached to addresses. Select **Settings → Symbol** or click the **Symbol Table** button in the top band to open the **Symbol Table** window.
  
-{{ :en-us_products:mp_studio:symbol-table-marked.svg?860 |Figure 5. The SYMBOL TABLE window }}+{{ :en-us_products:mp_studio:symbol-table-marked.svg?860 |Figure 5. The Symbol Table window }}
  
   - Choose an area in **① the memory area tabs** (P Memory, M Memory, D Memory and so on) to show only the symbols of that area. The number next to a tab is the number of registered symbols.   - Choose an area in **① the memory area tabs** (P Memory, M Memory, D Memory and so on) to show only the symbols of that area. The number next to a tab is the number of registered symbols.
Line 90: Line 90:
 ===== Used Data ===== ===== Used Data =====
  
-Select **Run → Used Data** or click the **Used** button in the top band to open the **Used Memory** window. In the memory grid of each area you can see which locations the program uses.+Select **Run → Used Data** or click the **Used Data** button in the top band to open the **Used Data** window. In the memory grid of each area you can see which locations the program uses.
  
-{{ :en-us_products:mp_studio:use-data-viewer-marked.svg?425 |Figure 7. The memory grid of the Used Memory window (D Memory) }}+{{ :en-us_products:mp_studio:use-data-viewer-marked.svg?425 |Figure 7. The memory grid of the Used Data window (D Memory) }}
  
   * **① Area tabs:** choose the area to view: M Memory, T Memory, D Memory, C Memory or R Memory.   * **① Area tabs:** choose the area to view: M Memory, T Memory, D Memory, C Memory or R Memory.
en-us_products/mp_studio/memory_symbols.1794332161.txt.gz · Last modified: by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki