Differences

This shows you the differences between two versions of the page.

--- en-us_products:mpaino_16a16t [2026/11/01 00:49] – external edit 127.0.0.1
+++ en-us_products:mpaino_16a16t [2026/11/03 12:46] (current) – external edit 127.0.0.1
@@ Line 34: / Line 34: @@
 |  Power  |  -  |  Supply voltage  | DC 12~24V \\ For DC 24V, a power supply rated 0.5A or more is recommended  |
 |  Digital inputs  |  16 points \\ (Isolated)  |  Module 0: D0~D7 \\ Module 1: D8~D15  | operating input voltage: DC 0~40V \\ HIGH detection voltage: DC 5V or higher \\ 4 points/1COM \\ NPN/PNP input support  |
-|  Transistor outputs  |  16 points \\ (Isolated SINK)  |  Module 0: D64~D71 \\ Module 1: D72~D79  | P24 input voltage: DC 5~24V \\ load voltage: DC 0~100V \\ maximum allowable current: 1A/1 point, 8A/1COM \\ 8 points/1COM  |
+|  Transistor outputs  |  16 points \\ (Isolated SINK)  |  Module 0: D64~D71 \\ Module 1: D72~D79  | V+ input voltage: DC 5~24V \\ load voltage: DC 0~100V \\ maximum allowable current: 1A/1 point, 8A/1COM \\ 8 points/1COM  |
 |  High-Speed Inputs / Interrupts  |  2 points \\ (Isolated)  |  D0(INT0), D1(INT1) / COM0  | Max. 8kHz \\ Shared with digital inputs  |
 | ::: |  2 points \\ (Non-isolated)  |  SDA(D20·INT2), SCL(D21·INT3)  | At least 50kHz \\ Built-in 4.7kΩ pull-up \\ Shared with I²C communication  |
@@ Line 178: / Line 178: @@
 [[:en-us_guide:wiring#sink_transistor_output_one_channel_check|See the one-channel SINK transistor-output check before wiring for the first time. →]]
 ^ Module ^ Output terminals ^ Output power ^ Output configuration ^ Terminals and Wiring Example ^
-| Module 0 | D64~D71 | P24 \\ N24 | 8 isolated SINK transistor outputs |  {{:en-us_products:mpaino-output-tr8.svg?1002|MPAINO-16A16T output terminals and load wiring}}  |
+| Module 0 | D64~D71 | V+ \\ V− | 8 isolated SINK transistor outputs |  {{:en-us_products:mpaino-output-tr8.svg?1002|MPAINO-16A16T output terminals and load wiring}}  |
-| Module 1 | D72~D79 | P24 \\ N24 | 8 isolated SINK transistor outputs | ::: |
+| Module 1 | D72~D79 | V+ \\ V− | 8 isolated SINK transistor outputs | ::: |
-Connect a DC 5~24V supply to P24 on each module and connect its GND to N24. When ON, the selected output terminal is connected to the GND supplied at that module's N24.
+Connect a DC 5~24V supply to V+ on each module and connect its GND to V−. When ON, the selected output terminal is connected to the GND supplied at that module's V−.
 ^ Item ^ Rating ^