Differences

This shows you the differences between two versions of the page.

--- en-us_products:mpaino_16a16t [2026/09/15 10:37] – external edit 127.0.0.1
+++ en-us_products:mpaino_16a16t [2026/09/15 15:28] (current) – external edit 127.0.0.1
@@ Line 14: / Line 14: @@
 Program the controller with Arduino IDE (Arduino C/C++) or MPINO STUDIO 2 (Arduino C/C++ & ladder logic).
-Use the [[:en-us_guide:getting_started#mpaino-16a16r_t|MPAINO-16A16T Arduino IDE getting-started guide]] to select the board and port and check the first input and output.
+See the [[:en-us_products:mpaino#mpaino_series_specifications|MPAINO Series specifications]] for the board name and base pin numbers for MPAINO-16A16T.
@@ Line 48: / Line 48: @@
 ===== Digital inputs =====
+[[:en-us_guide:wiring#digital_input_one_channel_check|See the one-channel digital-input check before wiring for the first time. →]]
 ^ Module ^ Group ^ Terminal ^ Input Configuration ^ Terminals and Wiring Example ^
 | Module 0 | COM0 \\ COM1 | D0~D3 \\ D4~D7 | 8 isolated digital inputs \\ D0/D1 also serve as INT0/INT1 |  {{:en-us_products:mpaino-input-io8.svg?740|MPAINO-16A16T digital input terminals and NPN/PNP wiring}}  |
@@ Line 175: / Line 176: @@
 ===== Transistor outputs =====
+[[:en-us_guide:wiring#sink_transistor_output_one_channel_check|See the one-channel SINK transistor-output check before wiring for the first time. →]]
 ^ Module ^ Output terminals ^ Output power ^ Output configuration ^ Terminals and Wiring Example ^
 | Module 0 | D64~D71 | P24 \\ N24 | 8 isolated SINK transistor outputs |  {{:en-us_products:mpaino-output-tr8.svg?1002|MPAINO-16A16T output terminals and load wiring}}  |