Differences

This shows you the differences between two versions of the page.

--- en-us_products:mpaino_24a24t [2026/09/14 14:51] – external edit 127.0.0.1
+++ en-us_products:mpaino_24a24t [2026/09/15 15:28] (current) – external edit 127.0.0.1
@@ Line 13: / Line 13: @@
 Program the controller with Arduino IDE (Arduino C/C++) or MPINO STUDIO 2 (Arduino C/C++ & ladder logic).
+See the [[:en-us_products:mpaino#mpaino_series_specifications|MPAINO Series specifications]] for the board name and base pin numbers for MPAINO-24A24T.
 \\
@@ Line 42: / Line 47: @@
 ===== Digital inputs =====
+[[:en-us_guide:wiring#digital_input_one_channel_check|See the one-channel digital-input check before wiring for the first time. →]]
 ^ Module ^ Group ^ Terminal ^ Input Configuration ^ Terminals and Wiring Example ^
 | Module 0 | COM0 \\ COM1 | D0~D3 \\ D4~D7 | 8 isolated digital inputs \\ D0/D1 also serve as INT0/INT1 |  {{:en-us_products:mpaino-input-io8.svg?740|MPAINO-24A24T digital input terminals and NPN/PNP wiring}}  |
@@ Line 170: / Line 176: @@
 ===== Transistor outputs =====
+[[:en-us_guide:wiring#sink_transistor_output_one_channel_check|See the one-channel SINK transistor-output check before wiring for the first time. →]]
 ^ Module ^ Output terminals ^ Output power ^ Output configuration ^ Terminals and Wiring Example ^
 | Module 0 | D64~D71 | P24 \\ N24 | 8 isolated SINK transistor outputs |  {{:en-us_products:mpaino-output-tr8.svg?1002|MPAINO-24A24T output terminals and load wiring}}  |
@@ Line 891: / Line 898: @@
   - Select the verified COM number under Tools → Port in Arduino IDE.
   - Select ''MPAINO-24A24R(T)'' under Tools → Board.
-  - Select ''AVR ISP'' under Tools → Programmer and upload the program.
+  - Click **Verify (✓)** in Arduino IDE. If there are no errors, click **Upload (→)** to transfer the program.
 [[https://www.ilogics.net/ko-kr/resources/downloads/manual/15|Download MPAINO manual]]
@@ Line 913: / Line 920: @@
 [[:en-us_products:mpaino|← Back to MPAINO Series comparison]]