Differences

This shows you the differences between two versions of the page.

--- en-us_products:mpaino_32a16r [2026/09/15 10:37] – external edit 127.0.0.1
+++ en-us_products:mpaino_32a16r [2026/09/15 15:28] (current) – external edit 127.0.0.1
@@ Line 14: / Line 14: @@
 Program the controller with Arduino IDE (Arduino C/C++) or MPINO STUDIO 2 (Arduino C/C++ & ladder logic).
-Use the [[:en-us_guide:getting_started#mpaino-32a16r|MPAINO-32A16R Arduino IDE getting-started guide]] to select the board and port and check the first input and output.
+See the [[:en-us_products:mpaino#mpaino_series_specifications|MPAINO Series specifications]] for the board name and base pin numbers for MPAINO-32A16R.
@@ Line 47: / Line 47: @@
 ===== Digital inputs =====
+[[:en-us_guide:wiring#digital_input_one_channel_check|See the one-channel digital-input check before wiring for the first time. →]]
 ^ Module ^ Group ^ Terminal ^ Input Configuration ^ Terminals and Wiring Example ^
 | Module 0 | COM0 \\ COM1 | D0~D7 \\ D8~D15 | 16 isolated digital inputs \\ D0/D1 also serve as INT0/INT1 |  {{:en-us_products:mpaino-input-in16.svg?628|MPAINO-32A16R digital input terminals and NPN/PNP wiring}}  |
@@ Line 174: / Line 175: @@
 ===== Relay outputs =====
+[[:en-us_guide:wiring#relay_output_one_channel_check|See the one-channel relay-output check before wiring for the first time. →]]
 ^ Module ^ Group ^ Output terminals ^ Contact configuration ^ Terminals and Wiring Example ^
 | Module 0 | COM0~COM3 | D64~D79 | 16 relay outputs \\ 4 points/1COM |  {{:en-us_products:mpaino-output-relay16.svg?740|MPAINO-32A16R output terminals and load wiring}}  |