Differences

This shows you the differences between two versions of the page.

--- en-us_products:mpaino_48a48r [2026/09/13 00:34] – external edit 127.0.0.1
+++ en-us_products:mpaino_48a48r [2026/09/15 15:28] (current) – external edit 127.0.0.1
@@ Line 13: / Line 13: @@
 Program the controller with Arduino IDE (Arduino C/C++) or MPINO STUDIO 2 (Arduino C/C++ & ladder logic).
+See the [[:en-us_products:mpaino#mpaino_series_specifications|MPAINO Series specifications]] for the board name and base pin numbers for MPAINO-48A48R.
 \\
@@ Line 41: / Line 46: @@
 ===== Digital inputs =====
+[[:en-us_guide:wiring#digital_input_one_channel_check|See the one-channel digital-input check before wiring for the first time. →]]
 ^ Module ^ Group ^ Terminal ^ Input Configuration ^ Terminals and Wiring Example ^
 | Module 0 | COM0 \\ COM1 | D0~D3 \\ D4~D7 | 8 isolated digital inputs |  {{:en-us_products:mpaino-input-io8.svg?740|MPAINO-48A48R digital input terminals and NPN/PNP wiring}}  |
@@ Line 172: / Line 178: @@
 ===== Relay outputs =====
+[[:en-us_guide:wiring#relay_output_one_channel_check|See the one-channel relay-output check before wiring for the first time. →]]
 ^ Module ^ Group ^ Output terminals ^ Contact configuration ^ Terminals and Wiring Example ^
 | Module 0 | COM2 \\ COM3 | D64~D67 \\ D68~D71 | 8 relay outputs \\ 4 points/1COM |  {{:en-us_products:mpaino-output-relay8.svg?740|MPAINO-48A48R output terminals and load wiring}}  |
@@ Line 283: / Line 290: @@
 <code cpp>
-// Serial Monitor via MP download cable ↔ RS-232 Serial1
+// Serial Monitor via USB download port ↔ RS-232 Serial1
 void setup() {
   Serial.begin(115200);
@@ Line 302: / Line 309: @@
 <code cpp>
-// MP download cable Serial monitor ↔ RS-485 Serial2
+// USB download port Serial Monitor ↔ RS-485 Serial2
 void setup() {
   Serial.begin(115200);
@@ Line 321: / Line 328: @@
 <code cpp>
-// MP download cable Serial monitor ↔ UART Serial3
+// USB download port Serial Monitor ↔ UART Serial3
 void setup() {
   Serial.begin(115200);
@@ Line 895: / Line 902: @@
   - Select the verified COM number under Tools → Port in Arduino IDE.
   - Select ''MPAINO-48A48R(T)'' under Tools → Board.
-  - Select ''AVR ISP'' under Tools → Programmer and upload the program.
+  - Click **Verify (✓)** in Arduino IDE. If there are no errors, click **Upload (→)** to transfer the program.
 [[https://www.ilogics.net/ko-kr/resources/downloads/manual/15|Download MPAINO manual]]
@@ Line 917: / Line 924: @@
 [[:en-us_products:mpaino|← Back to MPAINO Series comparison]]