Differences

This shows you the differences between two versions of the page.

--- en-us_products:mpaino_64a64r [2026/09/15 10:37] – external edit 127.0.0.1
+++ en-us_products:mpaino_64a64r [2026/09/15 15:28] (current) – external edit 127.0.0.1
@@ Line 14: / Line 14: @@
 Program the controller with Arduino IDE (Arduino C/C++) or MPINO STUDIO 2 (Arduino C/C++ & ladder logic).
-Use the [[:en-us_guide:getting_started#mpaino-64a64r_t|MPAINO-64A64R Arduino IDE getting-started guide]] to select the board and port and check the first input and output.
+See the [[:en-us_products:mpaino#mpaino_series_specifications|MPAINO Series specifications]] for the board name and base pin numbers for MPAINO-64A64R.
@@ Line 46: / Line 46: @@
 ===== Digital inputs =====
+[[:en-us_guide:wiring#digital_input_one_channel_check|See the one-channel digital-input check before wiring for the first time. →]]
 ^ Module ^ Group ^ Terminal ^ Input Configuration ^ Terminals and Wiring Example ^
 | Module 0 | COM0 \\ COM1 | D0~D3 \\ D4~D7 | 8 isolated digital inputs |  {{:en-us_products:mpaino-input-io8.svg?740|MPAINO-64A64R digital input terminals and NPN/PNP wiring}}  |
@@ Line 179: / Line 180: @@
 ===== Relay outputs =====
+[[:en-us_guide:wiring#relay_output_one_channel_check|See the one-channel relay-output check before wiring for the first time. →]]
 ^ Module ^ Group ^ Output terminals ^ Contact configuration ^ Terminals and Wiring Example ^
 | Module 0 | COM2 \\ COM3 | D64~D67 \\ D68~D71 | 8 relay outputs \\ 4 points/1COM |  {{:en-us_products:mpaino-output-relay8.svg?740|MPAINO-64A64R output terminals and load wiring}}  |