Differences

This shows you the differences between two versions of the page.

--- en-us_products:mpaino_8a8r [2026/09/14 22:39] – external edit 127.0.0.1
+++ en-us_products:mpaino_8a8r [2026/09/15 15:28] (current) – external edit 127.0.0.1
@@ Line 14: / Line 14: @@
 Program the controller with Arduino IDE (Arduino C/C++) or MPINO STUDIO 2 (Arduino C/C++ & ladder logic).
-See [[:en-us_guide:getting_started#mpaino-8a8r_t_first_upload|MPAINO-8A8R(T) Arduino IDE getting started]] for installation, board and port selection, and your first upload.
+See the [[:en-us_products:mpaino#mpaino_series_specifications|MPAINO Series specifications]] for the board name and base pin numbers for MPAINO-8A8R.
 \\
@@ Line 44: / Line 48: @@
 ===== Digital inputs =====
+[[:en-us_guide:wiring#digital_input_one_channel_check|See the one-channel digital-input check before wiring for the first time. →]]
 ^ Group ^ Terminal ^ Input Configuration ^ Terminals and Wiring Example ^
 | COM0 | D0~D3 | 4 isolated digital inputs \\ D0/D1 also serve as INT0/INT1 |  {{:en-us_products:mpaino-input-io8.svg?740|MPAINO-8A8R digital input terminals and NPN/PNP wiring}}  |
@@ Line 179: / Line 184: @@
 ===== Relay outputs =====
+[[:en-us_guide:wiring#relay_output_one_channel_check|See the one-channel relay-output check before wiring for the first time. →]]
 ^ Group ^ Output terminals ^ Contact configuration ^ Terminals and Wiring Example ^
 | COM2 | D64~D67 | 4 relay outputs share COM2 |  {{:en-us_products:mpaino-output-relay8.svg?740|MPAINO-8A8R output terminals and load wiring}}  |