Differences

This shows you the differences between two versions of the page.

--- en-us_products:mpino_series [2026/09/15 13:15] – external edit 127.0.0.1
+++ en-us_products:mpino_series [2026/10/25 08:42] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== MPINO Series ======
-[[en-us_guide:getting_started|Arduino IDE Getting Started]] — Install Arduino IDE and the ILOGICS boards, connect MPINO, select its board and port, and check its first I/O.
+[[en-us_guide:getting_started|Arduino IDE Getting Started]] — Install Arduino IDE and the ILOGICS board package, connect MPINO, select its board and port, and check its first I/O.
 Compare the I/O and communication features of 9 MPINO Series models at a glance.
@@ Line 33: / Line 33: @@
 **MPINO-8A8R temperature sensor input: 0:** This means it has no dedicated temperature sensor input terminal. Its four analog input channels can be configured for NTC sensors when ordered for that input mode. See the [[:en-us_products:mpino_8a8r#analog_input|MPINO-8A8R analog input details]].
-===== Arduino IDE settings =====
+===== MPINO Series specifications =====
-Find the product below and select the same board name in Arduino IDE. The first I/O numbers are used by the output and input examples in the getting-started guide.
+Find the Arduino IDE board name, download cable, driver, and pin numbers for each product.
-^ Product ^ Arduino IDE board ^ PC connection and Device Manager ^ First I/O and output type ^
+^ Product ^ Arduino IDE board ^ Download cable and driver ^ Pin type ^ Pin numbers ^
-| [[en-us_products:mpino_8a4r_s|MPINO-8A4R-S]] · [[en-us_products:mpino_8a4t_s|MPINO-8A4T-S]] | ''MPINO-8A4R(T)-S'' | ILOGICS MP Download Cable \\ ''USB Serial Port(COMx)'' | input ''0'' (P0) → output ''32'' (P32) \\ relay / SINK transistor |
+| [[en-us_products:mpino_8a4r_s|MPINO-8A4R-S]] · [[en-us_products:mpino_8a4t_s|MPINO-8A4T-S]] | ''MPINO-8A4R(T)-S'' | MP Download Cable \\ [[https://www.ilogics.net/en-us/resources/downloads/driver/1|FTDI driver]] | Digital inputs | D0–D7 |
-| [[en-us_products:mpino_8a4r_su|MPINO-8A4R-SU]] | ''MPINO-8A4R-SU'' | ILOGICS MP Download Cable \\ ''USB Serial Port(COMx)'' | input ''0'' (I(0)) → output ''32'' (R(32)) \\ relay with an independent COM |
+| ::: | ::: | ::: | Digital outputs | D32–D35 |
-| [[en-us_products:mpino_8a8r_s|MPINO-8A8R-S]] · [[en-us_products:mpino_8a8t_s|MPINO-8A8T-S]] | ''MPINO-8A8R(T)-S'' | ILOGICS MP Download Cable \\ ''USB Serial Port(COMx)'' | input ''0'' (P0) → output ''32'' (R32/P32) \\ relay / SINK transistor |
+| ::: | ::: | ::: | Analog inputs | A0–A5 |
-| [[en-us_products:mpino_16a16r|MPINO-16A16R]] | ''MPINO-16A16R(T)'' | ILOGICS MP Download Cable \\ ''USB Serial Port(COMx)'' | input ''0'' (I(0)) → output ''32'' (R(32)) \\ relay |
+| ::: | ::: | ::: | Temperature sensor inputs | A6–A7 |
-| [[en-us_products:mpino_8a8r|MPINO-8A8R]] | ''MPINO-8A8R'' | ILOGICS MP Download Cable \\ ''USB Serial Port(COMx)'' | input ''22'' (I(22)) → output ''62'' (R(62)) \\ relay |
+| ::: | ::: | ::: | PWM | D21–D23 |
-| [[en-us_products:mpino_16a8r|MPINO-16A8R]] | ''MPINO-16A8R'' | product USB download port \\ ''Silicon Labs CP210x USB to UART Bridge(COMx)'' | input ''22'' (I(22)) → output ''39'' (R(39)) \\ relay |
+| ::: | ::: | ::: | Interrupts | D18, D19, D24, D25 |
-| [[en-us_products:mpino_16a8r8t|MPINO-16A8R8T]] | ''MPINO-16A8R8T'' | ILOGICS MP Download Cable \\ ''USB Serial Port(COMx)'' | input ''22'' (I(22)) → relay ''62'' (R(62)); transistor ''39'' (O(39)) \\ relay + SINK transistor |
+| [[en-us_products:mpino_8a4r_su|MPINO-8A4R-SU]] | ''MPINO-8A4R-SU'' | MP Download Cable \\ [[https://www.ilogics.net/en-us/resources/downloads/driver/1|FTDI driver]] | Digital inputs | D0–D7 |
+| ::: | ::: | ::: | Relay outputs | D32–D35 |
+| ::: | ::: | ::: | Analog inputs | A0–A3 |
+| ::: | ::: | ::: | Temperature sensor inputs | A4, A5 |
+| ::: | ::: | ::: | PWM | D21–D23, D26–D28 |
+| ::: | ::: | ::: | Interrupts | D18, D19, D24, D25 |
+| [[en-us_products:mpino_8a8r_s|MPINO-8A8R-S]] · [[en-us_products:mpino_8a8t_s|MPINO-8A8T-S]] | ''MPINO-8A8R(T)-S'' | MP Download Cable \\ [[https://www.ilogics.net/en-us/resources/downloads/driver/1|FTDI driver]] | Digital inputs | D0–D7 |
+| ::: | ::: | ::: | Digital outputs | D32–D39 |
+| ::: | ::: | ::: | Analog inputs | A0–A3 |
+| ::: | ::: | ::: | Temperature sensor inputs | A4, A5 |
+| ::: | ::: | ::: | PWM | D21–D23, D26–D28 |
+| ::: | ::: | ::: | Interrupts | D18, D19, D24, D25 |
+| [[en-us_products:mpino_16a16r|MPINO-16A16R]] | ''MPINO-16A16R(T)'' | MP Download Cable \\ [[https://www.ilogics.net/en-us/resources/downloads/driver/1|FTDI driver]] | Digital inputs | D0–D15 |
+| ::: | ::: | ::: | Relay outputs | D32–D47 |
+| ::: | ::: | ::: | Analog inputs | A0–A3 |
+| ::: | ::: | ::: | Temperature sensor inputs | A4, A5 |
+| ::: | ::: | ::: | PWM | D21–D23 |
+| ::: | ::: | ::: | Interrupts | D18, D19, D24, D25 |
+| [[en-us_products:mpino_8a8r|MPINO-8A8R]] | ''MPINO-8A8R'' | MP Download Cable \\ [[https://www.ilogics.net/en-us/resources/downloads/driver/1|FTDI driver]] | Digital inputs | D22–D29 |
+| ::: | ::: | ::: | Relay outputs | D62–D69 |
+| ::: | ::: | ::: | Analog inputs | A0–A3 |
+| ::: | ::: | ::: | PWM | D2, D3, D5–D8 |
+| ::: | ::: | ::: | High-speed counter inputs | D79, D47 |
+| ::: | ::: | ::: | Interrupts | D2, D3, D20, D21 |
+| [[en-us_products:mpino_16a8r|MPINO-16A8R]] | ''MPINO-16A8R'' | USB A-to-B cable \\ [[https://www.ilogics.net/en-us/resources/downloads/driver/2|CP210x driver]] | Digital inputs | D22–D37 |
+| ::: | ::: | ::: | Relay outputs | D39–D46 |
+| ::: | ::: | ::: | Analog inputs | A0–A3 |
+| ::: | ::: | ::: | Encoder / interrupts | D20, D21 |
+| [[en-us_products:mpino_16a8r8t|MPINO-16A8R8T]] | ''MPINO-16A8R8T'' | MP Download Cable \\ [[https://www.ilogics.net/en-us/resources/downloads/driver/1|FTDI driver]] | Digital inputs | D22–D37 |
+| ::: | ::: | ::: | Relay outputs | D62–D69 |
+| ::: | ::: | ::: | Transistor outputs | D39–D46 |
+| ::: | ::: | ::: | Analog inputs | A0–A3 |
+| ::: | ::: | ::: | Temperature sensor inputs | A4, A5 |
+| ::: | ::: | ::: | Analog outputs | D6, D7 |
+| ::: | ::: | ::: | PWM | D2, D5, D11, D12 |
+| ::: | ::: | ::: | High-speed counter inputs | D74, D47 |
+| ::: | ::: | ::: | Interrupts | D2, D20, D21 |
+===== Download Markdown files =====
+Download the Markdown (.md) file, which contains detailed board specifications. Attach it to an AI assistant chat to provide the board information.
+^ Product ^ Markdown file ^
+| [[en-us_products:mpino_8a4r_s|MPINO-8A4R-S]] | [[https://www.ilogics.net/docs/downloads:mpino:en:mpino_8a4r_s?do=export_raw|Download Markdown (.md)]] |
+| [[en-us_products:mpino_8a4t_s|MPINO-8A4T-S]] | [[https://www.ilogics.net/docs/downloads:mpino:en:mpino_8a4t_s?do=export_raw|Download Markdown (.md)]] |
+| [[en-us_products:mpino_8a4r_su|MPINO-8A4R-SU]] | [[https://www.ilogics.net/docs/downloads:mpino:en:mpino_8a4r_su?do=export_raw|Download Markdown (.md)]] |
+| [[en-us_products:mpino_8a8r_s|MPINO-8A8R-S]] | [[https://www.ilogics.net/docs/downloads:mpino:en:mpino_8a8r_s?do=export_raw|Download Markdown (.md)]] |
+| [[en-us_products:mpino_8a8t_s|MPINO-8A8T-S]] | [[https://www.ilogics.net/docs/downloads:mpino:en:mpino_8a8t_s?do=export_raw|Download Markdown (.md)]] |
+| [[en-us_products:mpino_8a8r|MPINO-8A8R]] | [[https://www.ilogics.net/docs/downloads:mpino:en:mpino_8a8r?do=export_raw|Download Markdown (.md)]] |
+| [[en-us_products:mpino_16a8r|MPINO-16A8R]] | [[https://www.ilogics.net/docs/downloads:mpino:en:mpino_16a8r?do=export_raw|Download Markdown (.md)]] |
+| [[en-us_products:mpino_16a16r|MPINO-16A16R]] | [[https://www.ilogics.net/docs/downloads:mpino:en:mpino_16a16r?do=export_raw|Download Markdown (.md)]] |
+| [[en-us_products:mpino_16a8r8t|MPINO-16A8R8T]] | [[https://www.ilogics.net/docs/downloads:mpino:en:mpino_16a8r8t?do=export_raw|Download Markdown (.md)]] |
+==== Request an Arduino program using the Markdown file ====
+This example shows how to attach the MPINO-8A4R-S Markdown file to an AI assistant chat and request an Arduino IDE sketch that controls relay D32 using input D0.
+{{:products:mpino-series-ai-markdown-en-desktop.svg?1120|Example of attaching a Markdown file to an A.I LLM and requesting an Arduino IDE sketch}}
+{{:products:mpino-series-ai-markdown-en-mobile.svg?390|Example of attaching a Markdown file to an A.I LLM and requesting an Arduino IDE sketch}}