Differences

This shows you the differences between two versions of the page.

--- en-us_products:mpino_studio2:first_project [2026/09/14 09:35] – external edit 127.0.0.1
+++ en-us_products:mpino_studio2:first_project [2026/09/14 12:24] (current) – external edit 127.0.0.1
@@ Line 36: / Line 36: @@
   - **① Menu bar:** File, Edit, View, Run, Settings, and Help
-  - **② Activity bar:** Explorer, board and memory information, ladder tools, symbols, Serial Monitor, and settings
+  - **② Activity bar:** Explorer, Ladder Settings, Ladder Pin Map Settings, Library, Symbols, Serial Monitor, and Settings
   - **③ Sidebar:** Project and board information for the selected activity
   - **④ Editor:** Arduino C code or ladder circuit editor
@@ Line 145: / Line 145: @@
 ==== Real-Time Ladder Monitoring ====
-Before using real-time monitoring, select a communication port under **Settings → Ladder Settings → Monitoring Port**, then build and upload again. After that, press ''Ctrl+M'' or select **① Monitoring ON** in the ladder view.
+Before using real-time monitoring, select a communication port under **File → Preferences → Ladder Settings → Monitoring Port**, then build and upload again. After that, press ''Ctrl+M'' or select **① Monitoring ON** in the ladder view.
 When a physical input signal reaches P0, **② the P0 contact** and **③ the P32 coil** are highlighted. Press ''Esc'' to stop monitoring.