ILOGICS Product Documentation

User Tools

Site Tools

Trace:
en-us_products:mpino_studio2:memory

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
en-us_products:mpino_studio2:memory [2026/09/11 11:09] – 바깥 편집 127.0.0.1en-us_products:mpino_studio2:memory [2026/09/14 12:24] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ====== MPINO STUDIO 2 Phase 2 · Understand Memory ====== ====== MPINO STUDIO 2 Phase 2 · Understand Memory ======
  
-This page explains the differences between **P, M, D, C, T, and R memory**, address notation, memory-region settings, the Used Memory Map, and special-bit memory.+This page explains the differences between **P, M, D, C, T, and R memory**, address notation, memory-region settings, where memory is used in a project, and special-bit memory.
  
 {{ :en-us_products:mpino_studio2:memory-learning-path.svg?1000 |Memory understanding sequence }} {{ :en-us_products:mpino_studio2:memory-learning-path.svg?1000 |Memory understanding sequence }}
Line 91: Line 91:
 | ''C11'' to ''C99'' | Remaining C region not directly assigned above | Confirm the intended use before selecting an address | | ''C11'' to ''C99'' | Remaining C region not directly assigned above | Confirm the intended use before selecting an address |
  
-> **Critical check:** If you choose ''C0'' through ''C10'' as ordinary counter addresses on this board, their data can overlap with the board functions that use the same addresses. Before assigning a counter, inspect both the **pin map** under Board/Memory Information and the **Used Memory Map**.+> **Critical check:** If you choose ''C0'' through ''C10'' as ordinary counter addresses on this board, their data can overlap with the board functions that use the same addresses. Before assigning a counter, check **Settings → Ladder Pin Map Settings** and **Settings → Used Memory**.
  
 Mapped addresses vary by board and can also be changed by the user. Check them under **Settings → Ladder Pin Map Settings**. Mapped addresses vary by board and can also be changed by the user. Check them under **Settings → Ladder Pin Map Settings**.
Line 134: Line 134:
 ===== 5. Find Memory Used by the Project ===== ===== 5. Find Memory Used by the Project =====
  
-Select **View → Used Memory Map**, or press ''Ctrl+Shift+L''.+Select **Settings → Used Memory**, or press ''Ctrl+Shift+L''.
  
-{{ :products:mpino_studio2:memory-map-modal.png?800 |Figure 2. Addresses and references in the Used Memory Map }}+{{ :products:mpino_studio2:memory-map-modal.png?800 |Figure 2. Addresses and references in Used Memory }}
  
 Inspecting this map before reassigning an address or reducing a memory-region size helps prevent duplicate use and out-of-range references. Inspecting this map before reassigning an address or reducing a memory-region size helps prevent duplicate use and out-of-range references.
Line 172: Line 172:
 | An entered address is rejected. | Check the region letter, address range, B/W/D prefix support, and ''.n'' bit-access support. | | An entered address is rejected. | Check the region letter, address range, B/W/D prefix support, and ''.n'' bit-access support. |
 | Memory Region Settings cannot be saved. | Check whether estimated SRAM use exceeds total SRAM and is shown in red. | | Memory Region Settings cannot be saved. | Check whether estimated SRAM use exceeds total SRAM and is shown in red. |
-| An address does not appear in the Used Memory Map. | Select the correct region tab and ladder/code filters, enter the address, and press ''Enter''. |+| An address does not appear in Used Memory. | Select the correct region tab and ladder/code filters, enter the address, and press ''Enter''. |
 | A C counter value is unexpected. | First check for overlap with the ''C0'' through ''C10'' board pin mapping on MPINO-8A4R(T)-S. | | A C counter value is unexpected. | First check for overlap with the ''C0'' through ''C10'' board pin mapping on MPINO-8A4R(T)-S. |
 | ''@F1000'' cannot be entered. | Confirm that the selected cell is a bit contact and that no parentheses are present. | | ''@F1000'' cannot be entered. | Confirm that the selected cell is a bit contact and that no parentheses are present. |
  
 ===== Related Documentation ===== ===== Related Documentation =====
 +
 +  * [[en-us_products:mpino_studio2:activity_bar|Phase 8 · Activity Bar and Side Panels]]
  
   * [[en-us_products:mpino_studio2:menus_settings|Phase 7 · Menus and Preferences]]   * [[en-us_products:mpino_studio2:menus_settings|Phase 7 · Menus and Preferences]]
en-us_products/mpino_studio2/memory.1789092540.txt.gz · Last modified: by 127.0.0.1
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki