en-us_products:mpino_studio2:menus_settings

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
en-us_products:mpino_studio2:menus_settings [2026/11/13 17:54] – external edit 127.0.0.1en-us_products:mpino_studio2:menus_settings [2026/11/17 17:59] (current) – external edit 127.0.0.1
Line 210: Line 210:
 ^ Marker ^ Item ^ Setting ^ ^ Marker ^ Item ^ Setting ^
 | **①** | Channel | ''Serial1'', ''Serial2'', and ''Serial3'' channels provided by the board | | **①** | Channel | ''Serial1'', ''Serial2'', and ''Serial3'' channels provided by the board |
-| **②** | Protocol | None, Modbus RTU Slave, LS Electric Cnet Slave, MPLINK Master, or MPLINK Slave |+| **②** | Protocol | None, Modbus RTU Slave, LS Electric Cnet Slave, MPLINK Master, MPLINK Slave, or Modbus RTU Master |
 | **③** | Slave ID | 1–247 | | **③** | Slave ID | 1–247 |
 | **④** | Baud Rate | Baud used by the channel | | **④** | Baud Rate | Baud used by the channel |
Line 219: Line 219:
 Select **None** to leave the channel unused. Selecting **Modbus RTU Slave** or **LS Electric Cnet Slave** enables the Slave ID and serial settings. The defaults are Slave ID 1, 115200bps, 8 data bits, 1 stop bit, and no parity. Select **None** to leave the channel unused. Selecting **Modbus RTU Slave** or **LS Electric Cnet Slave** enables the Slave ID and serial settings. The defaults are Slave ID 1, 115200bps, 8 data bits, 1 stop bit, and no parity.
  
-**Modbus RTU Master** and **Modbus TCP/IP** are shown as coming-soon items and cannot be selected.+**Modbus TCP/IP** is shown as a coming-soon item and cannot be selected.
  
 Changes immediately update the current project and are used by the next build and upload. The current in-memory settings can be built before saving, but press ''Ctrl + S'' to keep them when the project is reopened. Changes immediately update the current project and are used by the next build and upload. The current in-memory settings can be built before saving, but press ''Ctrl + S'' to keep them when the project is reopened.
Line 228: Line 228:
  
 **Modbus RTU Slave** and **LS Electric Cnet Slave** channels do not stop the ladder scan or other communication channels while they receive a request or send a response. **Modbus RTU Slave** and **LS Electric Cnet Slave** channels do not stop the ladder scan or other communication channels while they receive a request or send a response.
 +
 +A **Comm trace** row appears under each channel that has a protocol selected. See [[en-us_products:mpino_studio2:monitoring#comm_trace|Phase 6 · Comm Trace]] for its settings and how to view it.
  
 ==== Modbus RTU Slave and LS Electric Cnet Slave Addresses ==== ==== Modbus RTU Slave and LS Electric Cnet Slave Addresses ====
Line 336: Line 338:
 | **⑤** | Used Memory | ''Ctrl + Shift + L'' | View only | Find memory addresses and their references in the project. | | **⑤** | Used Memory | ''Ctrl + Shift + L'' | View only | Find memory addresses and their references in the project. |
 | **⑥** | EEPROM Retain | ''Ctrl + Shift + E'' | Current project | Select memory areas retained after power is removed. | | **⑥** | EEPROM Retain | ''Ctrl + Shift + E'' | Current project | Select memory areas retained after power is removed. |
-| **⑦** | CLCD Settings | - | Current project | Set the address, size, and screens of I²C character LCDs. |+| **⑦** | CLCD Screen Editor | - | Current project | Set the address, size, and screens of I²C character LCDs. |
 | **⑧** | RTC (Clock) Settings | - | Current project | Set up loading the time of an external clock module into D memory. | | **⑧** | RTC (Clock) Settings | - | Current project | Set up loading the time of an external clock module into D memory. |
  
-See [[en-us_products:mpino_studio2:memory#memory_regions|Phase 2 · Memory Regions]] for Memory Area Settings and Used Memory. See [[en-us_products:mpino_studio2:box_functions:timer#timer_unit_settings|Phase 4-1 · Timer Unit Settings]] for the **Timer units** selected at the bottom of the Memory Area Settings window. See [[#ladder_design|Ladder Design]] above for design settings, and [[#clcd_settings|CLCD Settings]] and [[#rtc_clock_settings|RTC (Clock) Settings]] below for the CLCD and the RTC.+See [[en-us_products:mpino_studio2:memory#memory_regions|Phase 2 · Memory Regions]] for Memory Area Settings and Used Memory. See [[en-us_products:mpino_studio2:box_functions:timer#timer_unit_settings|Phase 4-1 · Timer Unit Settings]] for the **Timer units** selected at the bottom of the Memory Area Settings window. See [[#ladder_design|Ladder Design]] above for design settings, and [[#clcd_screen_editor|CLCD Screen Editor]] and [[#rtc_clock_settings|RTC (Clock) Settings]] below for the CLCD and the RTC.
  
 ==== Change Board ==== ==== Change Board ====
Line 448: Line 450:
 Option 2 does not automatically check whether the power-detect pin is used elsewhere. Select a pin that is not used for another I/O purpose. Option 2 does not automatically check whether the power-detect pin is used elsewhere. Select a pin that is not used for another I/O purpose.
  
-==== CLCD Settings ====+==== CLCD Screen Editor ====
  
-Use **Settings → CLCD Settings** to create the screens shown on a character LCD connected to the board's I²C port. Each screen holds fixed text and value fields that show memory values, and the ''CSCR'' box function in the ladder switches the screen the LCD shows. You can keep editing the ladder while this window is open.+Use **Settings → CLCD Screen Editor** to create the screens shown on a character LCD connected to the board's I²C port. Each screen holds fixed text and value fields that show memory values, and the ''CSCR'' box function in the ladder switches the screen the LCD shows. You can keep editing the ladder while this window is open.
  
 Supported LCDs are HD44780-compatible character LCDs fitted with a PCF8574 I²C adapter module. Choose a size of 20×4 or 16×2. A project can use up to 4 LCDs, and each LCD can have up to 255 screens. Supported LCDs are HD44780-compatible character LCDs fitted with a PCF8574 I²C adapter module. Choose a size of 20×4 or 16×2. A project can use up to 4 LCDs, and each LCD can have up to 255 screens.
  
-{{ :en-us_products:mpino_studio2:clcd-settings-marked.svg?1000 |LCD list, screen editing area, property tabs, and check results in the CLCD Settings window }}+{{ :en-us_products:mpino_studio2:clcd-settings-marked.svg?1000 |LCD list, screen editing area, property tabs, and check results in the CLCD Screen Editor window }}
  
 ^ Marker ^ Screen area ^ Action ^ ^ Marker ^ Screen area ^ Action ^
Line 493: Line 495:
 You can also select a range by dragging with the mouse. A value field inserted without a range is 6 cells wide for Integer and Real and 4 cells wide for Hex and Bit. Drag a value field to move it, or drag the right edge of the selected field to change its width. A field cannot be placed where it overlaps another field or extends past the screen. You can also select a range by dragging with the mouse. A value field inserted without a range is 6 cells wide for Integer and Real and 4 cells wide for Hex and Bit. Drag a value field to move it, or drag the right edge of the selected field to change its width. A field cannot be placed where it overlaps another field or extends past the screen.
  
-Undo in this window is recorded separately from ladder undo, and the undo history is cleared when the window closes. CLCD settings are applied to the current project as you edit. Press ''Ctrl + S'' to keep them in the project file.+Undo in this window is recorded separately from ladder undo, and the undo history is cleared when the window closes. Changes in the CLCD Screen Editor are applied to the current project as you edit. Press ''Ctrl + S'' to keep them in the project file.
  
 Use the **Field** tab to set the memory address and display format of the selected value field. Use the **Field** tab to set the memory address and display format of the selected value field.
Line 549: Line 551:
 When the condition turns OFF, the LCD keeps the last screen and its value fields keep updating. If PAGE is not a screen number of that LCD, the screen does not change. An LCD whose ''CSCR'' condition has not turned ON since the board started shows no characters. When the condition turns OFF, the LCD keeps the last screen and its value fields keep updating. If PAGE is not a screen number of that LCD, the screen does not change. An LCD whose ''CSCR'' condition has not turned ON since the board started shows no characters.
  
-Right-click a ''CSCR'' cell in the ladder and select **Open this screen in CLCD Settings** to open the CLCD Settings window with the ADR LCD and the PAGE screen selected. The same button appears when you enter ''CSCR'' in the box function editor. If CLCD Settings has no LCD with that address, only the window opens.+Right-click a ''CSCR'' cell in the ladder and select **Open this screen in CLCD Screen Editor** to open the CLCD Screen Editor window with the ADR LCD and the PAGE screen selected. The same button appears when you enter ''CSCR'' in the box function editor. If the CLCD Screen Editor has no LCD with that address, only the window opens.
  
-If you confirm a ''CSCR'' cell while CLCD Settings has no LCD, a 20×4 LCD and a screen are created automatically from its ADR and PAGE, and a notification appears. If PAGE is an address, screen ''0'' is created. Select **Open** in the notification to open the CLCD Settings window.+If you confirm a ''CSCR'' cell while the CLCD Screen Editor has no LCD, a 20×4 LCD and a screen are created automatically from its ADR and PAGE, and a notification appears. If PAGE is an address, screen ''0'' is created. Select **Open** in the notification to open the CLCD Screen Editor window.
  
 See [[en-us_products:mpino_studio2:box_functions#box_function_list|Phase 4 · Box Function List]] for ''CSCR'' together with the other box functions. See [[en-us_products:mpino_studio2:box_functions#box_function_list|Phase 4 · Box Function List]] for ''CSCR'' together with the other box functions.
  
-The check results at the bottom of the window list errors and warnings in CLCD Settings and ''CSCR'' cells, and the same items appear on the **Problems** tab of the Bottom Panel. Select an item to go to its LCD, screen, value field, or ladder cell. If an LCD called by ''CSCR'' has a settings error, the project cannot be built. An LCD that no ''CSCR'' calls only shows a warning and is left out of the build.+The check results at the bottom of the window list errors and warnings in the CLCD Screen Editor and ''CSCR'' cells, and the same items appear on the **Problems** tab of the Bottom Panel. Select an item to go to its LCD, screen, value field, or ladder cell. If an LCD called by ''CSCR'' has a settings error, the project cannot be built. An LCD that no ''CSCR'' calls only shows a warning and is left out of the build.
  
 **CLCD RAM** is an estimate of the board RAM used by the CLCD feature. It turns yellow when it exceeds 25% of the board RAM, and the build makes the final call on whether it fits. **CLCD RAM** is an estimate of the board RAM used by the CLCD feature. It turns yellow when it exceeds 25% of the board RAM, and the build makes the final call on whether it fits.
Line 685: Line 687:
 | Pin addresses are incorrect after a board change. | Current board and Ladder Pin Map Settings | Check the addresses in **Settings → Ladder Pin Map Settings** and rebuild. | | Pin addresses are incorrect after a board change. | Current board and Ladder Pin Map Settings | Check the addresses in **Settings → Ladder Pin Map Settings** and rebuild. |
 | EEPROM Retain cannot be saved. | Memory range, overlap, capacity, and Power detect pin | Correct the indicated fields and select a power-detect pin for Option 2. | | EEPROM Retain cannot be saved. | Memory range, overlap, capacity, and Power detect pin | Correct the indicated fields and select a power-detect pin for Option 2. |
-| Nothing appears on the LCD. | ''CSCR'' condition, LCD response, and uploaded program | Check that the left condition of ''CSCR'' turns ON and whether **Device display** in the CLCD Settings window shows **LCD not responding**, then build and upload again with the changed screens. |+| Nothing appears on the LCD. | ''CSCR'' condition, LCD response, and uploaded program | Check that the left condition of ''CSCR'' turns ON and whether **Device display** in the CLCD Screen Editor window shows **LCD not responding**, then build and upload again with the changed screens. |
 | Update checking fails. | Internet and update-server connection | Check the network connection and try again. | | Update checking fails. | Internet and update-server connection | Check the network connection and try again. |
  
en-us_products/mpino_studio2/menus_settings.1794560065.txt.gz · Last modified: by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki