Differences

This shows you the differences between two versions of the page.

--- en-us_products:mpino_studio2:quick_reference [2026/09/12 21:42] – 만듦 - 바깥 편집 127.0.0.1
+++ en-us_products:mpino_studio2:quick_reference [2026/09/12 21:45] (current) – 바깥 편집 127.0.0.1
@@ Line 18: / Line 18: @@
 ===== Default Shortcuts =====
-^ Task ^ Shortcut ^ More information ^
+^ Task · select for details ^ Default shortcut ^
-| New / Open / Save | ''Ctrl + N'' / ''Ctrl + O'' / ''Ctrl + S'' | [[en-us_products:mpino_studio2:menus_settings#openㆍsaveㆍprint_projects|Open and save projects]] |
+| [[en-us_products:mpino_studio2:menus_settings#openㆍsaveㆍprint_projects|New / Open / Save]] | ''Ctrl + N'' / ''Ctrl + O'' / ''Ctrl + S'' |
-| Build / Upload | ''Ctrl + R'' / ''Ctrl + U'' | [[en-us_products:mpino_studio2:menus_settings#run_menu|Run menu]] |
+| [[en-us_products:mpino_studio2:menus_settings#run_menu|Build / Upload]] | ''Ctrl + R'' / ''Ctrl + U'' |
-| NO / NC contact | ''F2'' / ''F3'' | [[en-us_products:mpino_studio2:ladder_editing#define_and_create_no_nc_and_not_contacts|Create contacts]] |
+| [[en-us_products:mpino_studio2:ladder_editing#define_and_create_no_nc_and_not_contacts|NO / NC contact]] | ''F2'' / ''F3'' |
-| Horizontal / Vertical line | ''F5'' / ''F6'' | [[en-us_products:mpino_studio2:ladder_editing#connect_horizontal_and_vertical_lines|Connect lines]] |
+| [[en-us_products:mpino_studio2:ladder_editing#connect_horizontal_and_vertical_lines|Horizontal / Vertical line]] | ''F5'' / ''F6'' |
-| SET / RESET / Output coil | ''F7'' / ''F8'' / ''F9'' | [[en-us_products:mpino_studio2:ladder_editing#create_an_output_coil|Create coils]] |
+| [[en-us_products:mpino_studio2:ladder_editing#create_an_output_coil|SET / RESET / Output coil]] | ''F7'' / ''F8'' / ''F9'' |
-| Enter box function | ''Ctrl + Enter'' | [[en-us_products:mpino_studio2:box_functions#create_a_box_function|Create box functions]] |
+| [[en-us_products:mpino_studio2:box_functions#create_a_box_function|Enter box function]] | ''Ctrl + Enter'' |
-| Write selected cell's memory value | ''Ctrl + Shift + W'' | [[en-us_products:mpino_studio2:ladder_editing#write_a_value_to_memory|Write a value to memory]] |
+| [[en-us_products:mpino_studio2:ladder_editing#write_a_value_to_memory|Write selected cell's memory value]] | ''Ctrl + Shift + W'' |
-| Toggle ladder monitoring | ''Ctrl + M'' | [[en-us_products:mpino_studio2:monitoring#start_and_stop_ladder_monitoring|Ladder monitoring]] |
+| [[en-us_products:mpino_studio2:monitoring#start_and_stop_ladder_monitoring|Toggle ladder monitoring]] | ''Ctrl + M'' |
-| Memory areas / Ladder pin map | ''Ctrl + Shift + M'' / ''Ctrl + Shift + P'' | [[en-us_products:mpino_studio2:menus_settings#settings_menu|Settings menu]] |
+| [[en-us_products:mpino_studio2:menus_settings#settings_menu|Memory areas / Ladder pin map]] | ''Ctrl + Shift + M'' / ''Ctrl + Shift + P'' |
-| Code completion / Go to definition | ''Ctrl + Space'' / ''F12'' | [[en-us_products:mpino_studio2:code_editor|Edit Arduino Code]] |
+| [[en-us_products:mpino_studio2:code_editor|Code completion / Go to definition]] | ''Ctrl + Space'' / ''F12'' |
 ''F2'' and ''F12'' depend on whether the ladder grid or code editor has focus. Select the intended editing area first.