Differences

This shows you the differences between two versions of the page.

--- en-us_products:mpino_studio2 [2026/09/08 14:11] – 바깥 편집 127.0.0.1
+++ en-us_products:mpino_studio2 [2026/09/14 09:35] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== MPINO STUDIO 2 User Manual ======
-MPINO Studio 2 is a desktop IDE for **writing Arduino C code and ladder logic, building and uploading projects, and monitoring ILOGICS MPINO industrial PLC boards**.
+MPINO Studio 2 is a desktop application for writing Arduino C code and ladder logic, building and uploading projects, and monitoring ILOGICS **MPINO and MPAINO industrial Arduino controllers**.
-If you are new to the application, review the installation steps and then begin with Phase 1.
 {{ :products:mpino_studio2:first-run-window.png?1000 |MPINO Studio 2 main window }}
 ===== Installation =====
+MPINO Studio 2 is currently provided as a beta. Check the download page below for the latest release status and changes before installing it.
 {{ :en-us_products:mpino_studio2:installation-flow.svg?1000 |MPINO Studio 2 installation workflow }}
-  - Open the [[https://www.ilogics.net/ko-kr/resources/downloads/software/4|MPINO STUDIO 2 installer download page]].
+  - Open the [[https://www.ilogics.net/en-us/resources/downloads/software/20|MPINO STUDIO 2 installer download page]].
   - Download and run the latest installer listed on the page.
   - If Windows displays an **Unknown publisher** warning, select **More info → Run anyway**.
   - Allow installation when Windows requests administrator permission.
   - Complete the installation and start MPINO Studio 2.
+MPINO STUDIO 1.x project files cannot be opened in MPINO Studio 2. Create a new project and re-enter the previous ladder logic and code after checking them.
 ===== Start Here =====
@@ Line 23: / Line 25: @@
 Create a project, select MPINO-8A4R(T)-S, and draw a ladder circuit in which input ''P0'' controls output ''P32''. You will then build the project, select a port, upload it, and check operation with the Serial Monitor and real-time ladder monitoring.
-===== Manual Roadmap =====
+**[[:en-us_products:mpino_studio2:memory|Phase 2 · Understand Memory →]]**
+Learn the differences between P, M, D, C, T, and R memory, data types, and address notation. Review memory-region settings, locate memory usage, and understand special-bit memory.
+**[[:en-us_products:mpino_studio2:ladder_editing|Phase 3 · Ladder Editing Basics →]]**
+Learn cell selection, memory writing, structural editing, NO and NC contacts, output coils, series and parallel connections, SET and RESET coils, edges, and a self-holding circuit.
+**[[:en-us_products:mpino_studio2:box_functions|Phase 4 · Box Functions →]]**
+Learn how to enter and edit box functions and when they run, then use timers, counters, arithmetic, transfers, bit operations, conversions, logic control, and free-form input.
+**[[:en-us_products:mpino_studio2:code_editor|Phase 5 · Editing Arduino Code →]]**
+Create and manage code files, use functions across files, work with completion and definitions, find and replace text, and locate code errors.
+**[[:en-us_products:mpino_studio2:monitoring|Phase 6 · Serial and Ladder Monitoring →]]**
+Receive and send text or HEX data, configure ladder monitoring, read power flow and live values, select number formats, and understand port sharing.
+**[[:en-us_products:mpino_studio2:menus_settings|Phase 7 · Menus and Preferences →]]**
+Open, save, and print projects; configure preferences and communications; write memory; change boards and pin maps; configure EEPROM retention; and use the Help menu.
+**[[en-us_products:mpino_studio2:activity_bar|Phase 8 · Activity Bar and Side Panels →]]**
+Open Explorer, Ladder Settings, Libraries, and Symbols; check the project and board; install or import libraries; and manage symbols.
+**[[en-us_products:mpino_studio2:troubleshooting|Phase 9 · Troubleshooting →]]**
+Find the first place to check and the detailed instructions when a build, upload, monitor connection, or I/O result fails.
+===== Quick Reference =====
-^ Phase ^ Topic ^ Status ^
+[[en-us_products:mpino_studio2:quick_reference|Find instructions by task and default shortcut →]]
-| Phase 1 | [[:en-us_products:mpino_studio2:first_project|Create Your First Project]] | Published |
-| Upcoming | Memory, pin maps and shortcuts, menus and preferences, ladder editing, contacts and coils, box functions, Arduino C editing, and monitoring | Added in sequence |