en-us_start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
en-us_start [2026/09/15 11:47] – external edit 127.0.0.1en-us_start [2026/11/12 15:35] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ====== ILOGICS Product Documentation ====== ====== ILOGICS Product Documentation ======
 +~~NOTOC~~
  
 Find instructions for selecting, installing, wiring, programming, and configuring communication for ILOGICS products. Browse industrial Arduino MPINO/MPAINO controllers, MPS/MPA ladder-logic PLCs, MNET communication slave I/O, and ILOGICS built-in functions by product family. Find instructions for selecting, installing, wiring, programming, and configuring communication for ILOGICS products. Browse industrial Arduino MPINO/MPAINO controllers, MPS/MPA ladder-logic PLCs, MNET communication slave I/O, and ILOGICS built-in functions by product family.
  
-[[:en-us_guide:getting_started|Get started with Arduino IDE →]]  [[:en-us_products:overview|Select a product]]+===== Manuals by Product Family =====
  
-===== Key Documentation =====+Choose a product family by control method and I/O requirements, then check each model's power, terminals, and wiring in that family's documentation.
  
-  * [[:en-us_products:overview|Product Selection Guide]]\\ Compare control methods and I/O requirements to find the right product. +[[:en-us_products:overview|Compare products →]]
-  * [[:en-us_products:overview#mps_8_integrated_mp_studio_models|PLC]]\\ MPS and MPA products are programmed using MP STUDIO ladder logic. +
-  * [[:en-us_products:overview#mpino_industrial_arduino9_integrated_models|Industrial Arduino]]\\ MPINO and MPAINO products are programmed using Arduino IDE or MPINO STUDIO 2. +
-  * [[:en-us_products:overview#mnet_4_communication_slave_i_o_models|Communication-only Controllers]]\\ MNET products control I/O through Modbus RTU or LS Industrial Systems Cnet. +
-  * [[:en-us_products:hmi|HMI]]\\ MPView Studio is under development for use on PCs and mobile devices. +
-  * [[:en-us_commands:builtin|Built-in Functions]]\\ Built-in functions developed by ILOGICS make programming easier.+
  
-===== Which Product Do You Need? =====+==== PLC ====
  
-==== MPINO ==== +Programmed in ladder logic with MP STUDIO.
-An all-in-one product family integrating the CPU, digital inputs, relay or transistor outputs, analog inputs, and communication circuits on a single PCB.+
  
-  * Build the main control-panel functions with one unit +  * {{ :products:home-mps.png?480&nolink |MPS-8A4T-S }} [[:en-us_products:mps|MPS]] **8 models**\\ All-in-one: CPU and I/O on a single PCB 
-  * Each model provides a defined I/O and terminal configuration +  * {{ :products:home-mpa.png?480&nolink |MPA-32A32R }} [[:en-us_products:mpa|MPA]] **14 models**\\ Modular: CPU and I/O modules connected by cables
-  * Based on ATmega128 or ATmega2560 +
-  * Select the product-specific board in Arduino IDE+
  
-[[:en-us_products:mpino_series|Explore MPINO →]] +Programs
-==== MPAINO ==== +
-A modular product family with the required I/O modules connected by cables to an ATmega2560 CPU module.+
  
-  * Digital I/O configurations starting at 8 points +  * {{ :en-us_products:mp_studio:overview-main-window.png?800&nolink |MP STUDIO 2 main window }} [[:en-us_products:mp_studio|MP STUDIO 2]]\\ A Windows application for writing MPS and MPA programs in ladder logic, checking them, downloading them to the device, and monitoring them.
-  * Choose relay or transistor outputs +
-  * Analog, PT100, and PWM module expansion +
-  * RS-232, RS-485, UART, and I²C interfaces+
  
-[[:en-us_products:mpaino|Explore MPAINO →]]+==== Industrial Arduino ====
  
-===== Features for Industrial Applications =====+Programmed with Arduino IDE or MPINO STUDIO 2 (Arduino C/C++ and ladder logic).
  
-=== Isolated Digital Inputs === +  * {{ :products:home-mpino.png?480&nolink |MPINO-16A16R }} [[:en-us_products:mpino_series|MPINO]] **9 models**\\ All-in-one: CPU and I/O on a single PCB 
-Field DC signals reach the MCU through optocouplers. MPAINO input modules accept DC 5~24V and include pull-down circuitry.+  * {{ :products:home-mpaino.png?480&nolink |MPAINO-16A16R }} [[:en-us_products:mpaino|MPAINO]] **14 models**\\ Modular: CPU and I/O modules connected by cables
  
-=== Choice of Output Type === +Programs
-Choose mechanical relay outputs or N-CH FET SINK transistor outputs to suit the application.+
  
-=== Industrial Communication === +  * {{ :en-us_products:mpino_studio2:hub-ladder.png?800&nolink |MPINO Studio 2 ladder editor }} [[:en-us_products:mpino_studio2|MPINO STUDIO 2]]\\ Write Arduino C code and ladder logic together, then build, upload, and monitor. 
-Depending on the product, RS-232, RS-485, UART, and I²C are available, along with built-in functions for Modbus RTU, LS Cnet, and Mitsubishi MC Protocol.+  * {{ :guide:home-arduino-ide.png?800&nolink |Arduino IDE editor }} [[:en-us_guide:getting_started|Arduino IDE]]\\ Install the ILOGICS boards and upload the first program to an MPINO or MPAINO product.
  
-=== Functions Built into the Core === +===== HMI Manuals =====
-Call functions such as ''Iton()'', ''Ibounce()'', ''Iscale()'', and ''IpidRun()'' directly from an Arduino sketch.+
  
-===== First-Time Setup =====+  * [[:en-us_products:hmi|MPView]] **Coming soon**\\ ILOGICS HMI software for PCs and mobile devices. Works with MPS, MPA, MPINO, and MPAINO. 
 +  * [[:en-us_guide:hmi_connection|HMI Connection]]\\ Connect an HMI to an ILOGICS industrial Arduino to monitor the machine on screen and control it from the panel.
  
-  - [[:en-us_products:overview|Compare product families and I/O configurations]]. +===== Communication I/O Control =====
-  - Check power, terminals, output type, and COM configuration on the selected model's detail page. +
-  - For MPINO/MPAINO, see [[:en-us_guide:getting_started|the Arduino IDE getting-started guide]] for board-package installation and product-board selection. +
-  - For MPS/MPA, see each product page for MP STUDIO model selection and download procedures. +
-  - For MNET, see [[:en-us_products:mnet|the MNET Series documentation]] for the ordered protocol, baud rate, slave address, and I/O addresses. +
-  - Wire the unit and set the DIP switches with the power off. +
-  - Verify one input and one output before building the complete control system.+
  
-**Important:** Program MPINO/MPAINO with Arduino or ladder logic, and MPS/MPA with MP STUDIO ladder logic. MNET uses communication-address reads and writes from a master device without downloading a user program. Do not apply settings or examples from another product family without checking compatibility.+==== MNET ====
  
-===== Quick Links =====+{{ :en-us_products:mnet-8a8r-connectors.svg?900 |MNET-8A8R connector guide }}
  
-  * [[:en-us_guide:getting_started|Getting Started with Arduino IDE]]+**4 models** 
 + 
 +Control I/O through the Modbus RTU or LS Industrial Systems Cnet protocol. 
 + 
 +The CPU module includes DIP switches for setting the baud rate and slave address. 
 + 
 +  * [[:en-us_products:mnet_8a8r|MNET-8A8R]] 8 digital inputs · 8 relay outputs 
 +  * [[:en-us_products:mnet_8a8t|MNET-8A8T]] 8 digital inputs · 8 transistor outputs 
 +  * [[:en-us_products:mnet_16a16r|MNET-16A16R]] 16 digital inputs · 16 relay outputs 
 +  * [[:en-us_products:mnet_32a32r|MNET-32A32R]] 32 digital inputs · 32 relay outputs 
 + 
 +[[:en-us_products:mnet|View the MNET manual →]] 
 + 
 +===== Documentation Links ===== 
 + 
 +**Products** 
 + 
 +  * [[:en-us_products:mpino_series|MPINO Series]] 
 +  * [[:en-us_products:mpaino|MPAINO Series]] 
 +  * [[:en-us_products:mps|MPS Series]] 
 +  * [[:en-us_products:mpa|MPA Series]] 
 +  * [[:en-us_products:mnet|MNET Series]] 
 + 
 +**Guides** 
 + 
 +  * [[:en-us_products:overview|Product Selection Guide]]
   * [[:en-us_guide:wiring|First wiring and I/O check]]   * [[:en-us_guide:wiring|First wiring and I/O check]]
-  * [[:en-us_commands:builtin|ILOGICS Built-in Functions]] 
   * [[:en-us_safety|Safety and Installation Precautions]]   * [[:en-us_safety|Safety and Installation Precautions]]
 +
 +**Programs**
 +
 +  * [[:en-us_products:mp_studio|MP STUDIO]]
 +  * [[:en-us_products:mpino_studio2|MPINO STUDIO]]
 +  * [[:en-us_guide:getting_started|Arduino IDE]]
 +  * [[:en-us_products:hmi|MPView]]
 +  * [[:en-us_guide:hmi_connection|HMI Connection]]
 +
 +**Support**
 +
 +  * [[:en-us_commands:builtin|Built-in Functions]]
 +  * [[https://www.ilogics.net/en-us/resources|Downloads]]
 +  * [[https://www.ilogics.net/en-us/support|Technical Support]]
 +  * [[https://www.ilogics.net/en-us|Store]]
  
en-us_start.1789440442.txt.gz · Last modified: by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki