Table of Contents
MPS-8A8T-S
MPS-8A8T-S is a all-in-one industrial PLC with 8 digital inputs and 8 SINK transistor outputs. Provides 4 analog inputs, 2 NTC temperature sensor inputs, 6 PWM outputs, and RS-485 communication.
Program with ladder logic using MP STUDIO.
Product Specifications
| Category | Quantity | Terminal / Item | Specifications |
|---|---|---|---|
| Programming method | - | - | MP STUDIO MP STUDIO2 (Ladder logic program) |
| Power | - | P24, N24 | DC 12~24V (0.5A or more when using DC 24V) |
| Digital inputs | 8 points (Solid-state, isolated) | P0~P7 | DC 0~40V; HIGH detection at DC 5V or higher COM0 shared NPN/PNP input support |
| Transistor outputs | 8 points (Solid-state, isolated) | P32~P39 | SINK outputs Max. 1A/1 points, 8A/1COM Connect external power to V+/V- |
| Analog inputs | 4 points (Non-isolated) | A0~A3 | Set to 0(4)~20mA, DC 0(1)~5V or DC 0~10V 10bit |
| Temperature sensor inputs | 2 points (Non-isolated) | NTEMP channels 0·1 | NTC 3950K, 10kΩ(25℃) -40~120℃ |
| High-Speed Counter / Encoder | 2 channels (Non-isolated) | CLK(A)·DIO(B) SDA(A)·SCL(B) | Max. 50kHz Channel 1 is shared with I²C |
| Pulse outputs | 6 points (Non-isolated) | PWM0~PWM5 | DC 5V, Max. 30mA 2 timers |
| Communication Channels | 1 channel (Non-isolated) | I²C | I²C Master |
| RS-485 | Modbus RTU Slave LS Industrial Systems Cnet(XGK) Slave IBUS Master·Slave |
||
| Memory | - | Flash | 128KB (32KB used by system) |
| Data Memory | 4KB (1KB used by system) |
Digital inputs
See the one-channel digital-input check before wiring for the first time. →
| Contact | COM | Input type | Connector / Wiring example |
|---|---|---|---|
| P0~P7 | COM0 | NPN/PNP inputs |  |
Transistor outputs
See the one-channel SINK transistor-output check before wiring for the first time. →
| Contact | Output type | Maximum current | Connector / Wiring example |
|---|---|---|---|
| P32~P39 | SINK: outputs GND connected to V- when ON | 1A/1 points, 8A/1COM |  |
Analog / Temperature inputs
| channel | Selectable input ranges | Function block | Connector / Wiring example |
|---|---|---|---|
| A0~A3 | 0(4)~20mA, DC 0(1)~5V, DC 0~10V | ADC or ADC2 |  |
| NTEMP channels 0·1 | NTC 10kΩ, 3950K | NTEMP |
Select the analog input range through the jumper and resistor configuration. Check the settings of the ordered product before use.
PWM and High-Speed Inputs
| Function | Contacts / Channels | Points | Connector / Wiring example |
|---|---|---|---|
| PWM outputs | PWM0~PWM5 | 6 points |  |
| High-speed counter / Encoder channel 0 | CLK(A), DIO(B) | 1 channel |  |
| High-speed counter / Encoder channel 1 | SDA(A), SCL(B) | 1 channel |  |
PWM0~PWM2 share timer 1, and PWM3~PWM5 share timer 2.
Communication and Upload
| Function | Terminals / Cables | Usage | Connector / Wiring example |
|---|---|---|---|
| Program download | MP Download Cable | MP STUDIO download / monitoring |  |
| RS-485 | 485+, 485-, +5V, GND | Modbus RTU Slave, LS Industrial Systems Cnet(XGK) Slave, IBUS Master·Slave | |
| I²C communication | SDA, SCL | I²C Master | |
| FND / ENCO connector | CLK(A), DIO(B) | Display device or high-speed input channel 0 | |
| Power terminals | P24, N24 | DC 12–24V input |
Basic I/O example
0000 [ P0:Run button ]────────────────( P32:Transistor output )