Differences

This shows you the differences between two versions of the page.

--- en-us_commands:reference:isegbegin [2026/09/07 21:52] – 만듦 - 바깥 편집 127.0.0.1
+++ en-us_commands:reference:isegbegin [2026/09/08 00:53] (current) – 바깥 편집 127.0.0.1
@@ Line 17: / Line 17: @@
 <code cpp>
 void setup() {
-  IsegBegin(14, 15);       // MPAINO: TXD(D14), RXD(D15)
+  IsegBegin(14, 15, 100, 0);  // Set the CLK/DIO pins and device number of the TM1637 FND.
-  IsegBrightness(7);
+  IsegBegin(130, 131, 100, 1);  // MPAINO K/K2 GPIO channels 0, 1
-  IsegClear();
+  IsegBrightness(7, true, 0);  // Set display brightness and on/off state.
+  IsegBrightness(4, true, 1);  // Set display brightness and on/off state.
 }
 void loop() {
-  IsegDecimal((millis() / 1000UL) % 10000UL, true);
+  IsegDecimal(1234, false, 0, 4, 0, 0);  // Display an integer in decimal format.
-  delay(200);
+  IsegHex(0xABCD, false, 0, 4, 0, 1);  // Display an integer in hexadecimal format.
 }
 </code>
@@ Line 37: / Line 38: @@
   * Do not use the specified pins simultaneously for UART, PWM, encoders, external interrupts or other functions.
   * Check the actual module and product manuals for FND power and signal voltages.
+===== Built-in Commands in the Same Category =====
+  * [[:en-us_commands:reference:isegbrightness|IsegBrightness() View detailed description]]
+  * [[:en-us_commands:reference:isegclear|IsegClear() View detailed description]]
+  * [[:en-us_commands:reference:isegwrite|IsegWrite() View detailed description]]
+  * [[:en-us_commands:reference:isegdecimal|IsegDecimal() View detailed description]]
+  * [[:en-us_commands:reference:iseghex|IsegHex() View detailed description]]
+  * [[:en-us_commands:reference:isegencodedigit|IsegEncodeDigit() View detailed description]]
 [[:en-us_commands:builtin|← Built-in Command List]]