Differences

This shows you the differences between two versions of the page.

--- en-us_commands:reference:npwm_begin [2026/09/07 21:52] – 만듦 - 바깥 편집 127.0.0.1
+++ en-us_commands:reference:npwm_begin [2026/09/08 00:53] (current) – 바깥 편집 127.0.0.1
@@ Line 16: / Line 16: @@
 <code cpp>
-NPWM_BEGIN(21, 1000, 50.0F, 100);
+void setup()
+{
+    NPWM_BEGIN(0, 1000, 50.0F, 100);  // Prepare pulse output with the specified frequency, duty cycle and pulse count.
+}
+void loop()
+{
+    NPWM(0);  // Output the configured number of pulses.
+}
 </code>
@@ Line 24: / Line 32: @@
   * Changing frequency or resolution may also affect other channels on the same timer.
   * Ensure the connected load is safe when stopping or resetting outputs.
+===== Built-in Commands in the Same Category =====
+  * [[:en-us_commands:reference:npwm|NPWM() View detailed description]]
 [[:en-us_commands:builtin|← Built-in Command List]]