Differences

This shows you the differences between two versions of the page.

--- en-us_products:mnet_8a8r [2026/09/17 12:16] – external edit 127.0.0.1
+++ en-us_products:mnet_8a8r [2026/10/25 08:42] (current) – external edit 127.0.0.1
@@ Line 3: / Line 3: @@
 MNET-8A8R is a communication slave product whose digital I/O, analog I/O, temperature sensor inputs, and high-speed pulse I/O can be controlled from a master device such as a PC, HMI, or PLC using Modbus or LS Industrial Systems Cnet.
-Consists of a CPU module (1 RS-232 channel, 1 RS-485 channel, and 1 UART channel) and an I/O module (8 digital inputs and 8 relay outputs).
+It consists of a CPU module (1 RS-232 channel, 1 RS-485 channel, and 1 UART channel) and an I/O module (8 digital inputs and 8 relay outputs).
 Select Modbus RTU Slave or LS Industrial Systems Cnet Slave in the options when ordering.
@@ Line 15: / Line 15: @@
 |  Power  |  -  |  +24V, GND, F.G  | DC 12~24V \\ For DC 24V, a power supply rated 0.5A or more is recommended  |
 |  Digital inputs  |  8 points \\ (Isolated)  |  0~7 \\ Modbus 0~7 \\ Cnet P0000~P0007  | Operating input voltage DC 0~80V \\ HIGH detection: DC 5V or higher \\ Optocoupler isolation  |
-|  Relay outputs  |  8 points \\ (Isolated dry contacts)  |  0~7 \\ Modbus 32~39 \\ Cnet P0032~P0039  | DC 0~30V or AC 0~250V \\ Max. 5A/1 points, 8A/1COM  |
+|  Relay outputs  |  8 points \\ (Isolated dry contacts)  |  0~7 \\ Modbus 32~39 \\ Cnet P0032~P0039  | DC 0~30V or AC 0~250V \\ Max. 5A/1 point, 8A/1COM  |
 |  Communication protocol  |  Order option  |  Modbus RTU Slave \\ LS Industrial Systems Cnet Slave  | Select one of the two protocols when ordering  |
 |  Communication Channels  |  1 channel each  |  RS-232 \\ RS-485 \\ UART  | Use the port wired to the master device  |
@@ Line 89: / Line 89: @@
 ^ Code ^ Function ^ Points per module ^ Maximum configuration ^ Value format ^
-| X | Analog inputs | 4 points | X~X5, up to 20 points | 15bit, 0~32,767 \\ NTC mode: temperature ×10 |
+| X | Analog inputs | 4 points | X~X5, up to 20 points | 15-bit, 0~32,767 \\ NTC mode: temperature ×10 |
 | F | PT100Ω temperature sensor input | 4 points | F~F5, up to 20 points | −200~800℃ \\ Temperature ×10 |
-| Y | Analog outputs | 3 points | Y~Y4, up to 12 points | 16bit, 0~65,535 |
+| Y | Analog outputs | 3 points | Y~Y4, up to 12 points | 16-bit, 0~65,535 |
 | K | High-speed pulse outputs | 6 points | K~K2, up to 12 points | DC 5V, 30mA or less \\ Max. 1MHz |
@@ Line 100: / Line 100: @@
 Configure analog inputs (X) and PT100Ω inputs (F) for **a combined maximum of 20 points**, and analog outputs (Y) and high-speed pulse outputs (K) for **a combined maximum of 12 points**. You cannot order a configuration that simply adds the maximum point count of every module.
-Options are assembled and shipped in the selected configuration; users cannot add or remove I/O or optional modules. Also see [[:en-us_products:mnet#옵션_모듈|MNET Series option configuration guide]].
+Options are assembled and shipped in the selected configuration; users cannot add or remove I/O or optional modules. Also see [[:en-us_products:mnet#optional_modules|MNET Series option configuration guide]].
 ==== Interpreting option values ====