en-us_products:mpino_studio2:box_functions:counter:ctu

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en-us_products:mpino_studio2:box_functions:counter:ctu [2026/09/10 01:05] – 만듦 - 바깥 편집 127.0.0.1en-us_products:mpino_studio2:box_functions:counter:ctu [2026/11/13 00:27] (current) – external edit 127.0.0.1
Line 14: Line 14:
  
   * Target — counter memory C<n> (16-bit) or DC<n> (32-bit) that stores the count value   * Target — counter memory C<n> (16-bit) or DC<n> (32-bit) that stores the count value
-  * preset — count at which the done bit turns ON (an integer, not time)+  * preset — count at which the done bit turns ON. An integer or a memory address such as ''D10'' (time units are not accepted)
  
 ===== Behavior Example ===== ===== Behavior Example =====
Line 26: Line 26:
  
   * A counter changes once per rising edge of the left condition. On MPINO-8A4R(T)-S, C0 through C10 are mapped to board functions, so use C11 or later for a counter.   * A counter changes once per rising edge of the left condition. On MPINO-8A4R(T)-S, C0 through C10 are mapped to board functions, so use C11 or later for a counter.
 +  * If you enter a memory address such as ''D10'' as the preset, you can change the target count while running, for example from an HMI. When the memory value is 0, the counter does not complete. For details, see [[en-us_products:mpino_studio2:box_functions:counter#set_the_preset_from_memory|Set the Preset from Memory]].
  
 ===== Box Functions in the Same Category ===== ===== Box Functions in the Same Category =====
en-us_products/mpino_studio2/box_functions/counter/ctu.1788969959.txt.gz · Last modified: by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki