en-us_products:mpino_studio2:box_functions:timer

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
en-us_products:mpino_studio2:box_functions:timer [2026/11/13 00:27] – external edit 127.0.0.1en-us_products:mpino_studio2:box_functions:timer [2026/11/13 17:54] (current) – external edit 127.0.0.1
Line 79: Line 79:
  
 > **Caution right after power-on:** The memory value is 0 until the HMI writes it, so during that time TON completes immediately and TPL and TMON produce no output. To keep the value through a power cycle, register that memory in [[en-us_products:mpino_studio2:menus_settings#eeprom_retain|EEPROM Retain]] (''Ctrl + Shift + E''). > **Caution right after power-on:** The memory value is 0 until the HMI writes it, so during that time TON completes immediately and TPL and TMON produce no output. To keep the value through a power cycle, register that memory in [[en-us_products:mpino_studio2:menus_settings#eeprom_retain|EEPROM Retain]] (''Ctrl + Shift + E'').
 +
 +For the HMI side (addresses, scaling, and input limits), see [[:en-us_guide:hmi_connection:studio2:timer_preset|Changing a Timer Preset from the HMI]].
  
 ===== Related Documentation ===== ===== Related Documentation =====
en-us_products/mpino_studio2/box_functions/timer.1794497224.txt.gz · Last modified: by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki