This is an old revision of the document!

IanalogWritef()

IanalogWritef() converts a user floating-point value to the analog output range and outputs it.

void IanalogWritef(uint8_t ch, float min, float max, float value)

Commands

Command	Arguments	Return Value	Operation
`IanalogWritef(ch, min, max, value)`	`uint8_t ch` — Analog output pin or channel to write `float min` — Minimum of the user input range `float max` — Maximum of the user input range `float value` — User input value to output	`void`	Converts a user floating-point value to the analog output range and outputs it.

void setup() {
}
 
void loop() {
  IanalogWritef(0, 0.0F, 10.0F, 2.5F);  // 25% output
  delay(500);
}

The argument order must be ch, min, max, value.
min and max define the user input range for interpreting value, rather than directly setting the electrical output range.
If value is outside min~max, the internal Iscalef() clamps it to the nearest endpoint.
Setting min greater than max reverses the output direction.
If min equals max, the output value is 0.
Changing Timer TOP with analogWriteInit() or analogWriteFreq() also changes the actual analogWrite() output range. Use the default TOP 65535 to retain 16-bit 0~65535 resolution.
Match the output module DIP switches, external supply and wiring to the connected equipment's input specifications.
Do not use these together with PWM, pulse output or counter commands using the same timer.