Irtc32kHz() enables or disables the RTC 32kHz output.

bool Irtc32kHz(bool enable = true)

void setup() {
  Serial.begin(115200);
  if (!IrtcBegin()) return;  // Check the DS3231 RTC connection and begin operation.
  IrtcSquareWave(true, IRTC_SQUARE_WAVE_1HZ);  // Set the RTC square-wave output.
  Irtc32kHz(true);  // Enable or disable the RTC 32kHz output.
}
 
void loop() {
  if (Iup(0, IdigitalRead(0, 5))) {  // Read the input repeatedly and update only if all samples match. If HIGH and LOW are mixed, retain the previous stable state. / Return true only at the instant the input changes from OFF to ON.
    IrtcSquareWave(false);  // Set the RTC square-wave output.
    Irtc32kHz(false);  // Enable or disable the RTC 32kHz output.
  }
}

Run each device's corresponding Begin command first. Check I²C addresses and pin sharing; if the bool return value is false, inspect wiring and power.

← Built-in Command List