FDPWM()

FDPWM() outputs PWM at the specified frequency and duty cycle.

void FDPWM(uint8_t pin, int32_t intHz, float Duty)

Commands

Command	Arguments	Return Value	Operation
`FDPWM(pin, intHz, Duty)`	`uint8_t pin` `int32_t intHz` `float Duty`	`void`	Outputs PWM at the specified frequency and duty cycle.

Example

void setup()
{
    // K channels 0~2 share Timer3.
    FDPWM(0, 1000, 25.0F);  // Output PWM at the specified frequency and duty cycle.
    FDPWM(1, 1000, 50.0F);  // Output PWM at the specified frequency and duty cycle.
    FDPWM(2, 1000, 75.0F);  // Output PWM at the specified frequency and duty cycle.
 
    // K channels 3~5 share Timer4.
    FDPWM(3, 500, 25.0F);  // Output PWM at the specified frequency and duty cycle.
    FDPWM(4, 500, 50.0F);  // Output PWM at the specified frequency and duty cycle.
    FDPWM(5, 500, 75.0F);  // Output PWM at the specified frequency and duty cycle.
}
 
void loop()
{
}

Precautions

Check product-specific PWM pins and timer sharing.
Changing frequency or resolution may also affect other channels on the same timer.
Ensure the connected load is safe when stopping or resetting outputs.

Built-in Commands in the Same Category

← Built-in Command List

ILOGICS Product Documentation

Table of Contents

FDPWM()

Commands

Example

Precautions

Built-in Commands in the Same Category