Itmr()

Itmr() (Retentive Timer) accumulates the time the condition is ON and clears it with the Reset input.

bool Itmr(uint8_t timer_id, bool state, unsigned long delayTime, bool reset = false)

Commands

Command	Arguments	Return Value	Operation
`Itmr(timer_id, state, delayTime, reset)`	`uint8_t timer_id` — Timer number. Supports `0` ~ `255` `bool state` — Timer input state `unsigned long delayTime` — Preset time in ms `bool reset = false` — Clear the `Itmr` accumulated value	`bool`	(Retentive Timer) accumulates the time the condition is ON and clears it with the Reset input.

Example

This example selects MPINO-8A4R(T)-S and uses input P0 and output P32. Call the command on every pass through loop() without blocking it. ON time at P0 accumulates. P32 turns on after 3 s; OFF time does not clear the sum. P1 resets it.

const uint8_t RUN_INPUT = 0;
const uint8_t RESET_INPUT = 1;
const uint8_t OUTPUT_PIN = 32;
 
void setup() {}
 
void loop() {
  const bool run = digitalRead(RUN_INPUT) == HIGH;
  const bool reset = digitalRead(RESET_INPUT) == HIGH;
  const bool elapsed = Itmr(0, run, 3000, reset);  // Accumulate ON time; clear it when reset is true.
  digitalWrite(OUTPUT_PIN, elapsed ? HIGH : LOW);
}

Precautions

Call the timer command repeatedly in loop() so elapsed time and OFF input are processed.
Do not share a timer_id between different timer operations; use a separate ID for each.
When reset is true, the accumulated time and done state are cleared.

Built-in Commands in the Same Category

← Built-in Command List

ILOGICS Product Documentation

Table of Contents

Itmr()

Commands

Example

Precautions

Built-in Commands in the Same Category