en-us_guide:seven_segment:wiring_mpino_16a8r8t
MPINO-16A8R8T 7-Segment LED Wiring
Connect up to 2 displays using the PWM port.
| Device number | LED CLK | LED DIO | Built-in function pin setting |
|---|---|---|---|
| 0 | P(5) (Arduino D5) | P(2) (Arduino D2) | IsegBegin(5, 2, 100, 0); |
| 1 | P(11) (Arduino D11) | P(12) (Arduino D12) | IsegBegin(11, 12, 100, 1); |
Terminals used for an LED cannot be used as PWM outputs at the same time. P(2) is shared with an external interrupt, so that cannot be used at the same time either. On both pairs the DIO terminal comes first when you read the terminal block from the top, so connect by terminal name rather than by position.
en-us_guide/seven_segment/wiring_mpino_16a8r8t.txt · Last modified: by 127.0.0.1